The device is not responding or can’t be turned on, Device do not charge – Инструкция по эксплуатации ASSISTANT e-ink AE-601
Страница 104
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
YOUR SUCSESS IS OUR CONCERN!
ASBISTAISTT
Temperature of storage: -40 .+125 °C
Relative humidity: 20-90 %
Weight: ~ 200 g
Size: 173 x 11^ 9 mm
Note
Design and specifications are subject to change without prior
note.
T R O U B L E S H O O T I N G
Potential problems and methods of their elimination are
shown below. If the problem could not be fixed, please
turn to the certified service center.
The device is not responding or can’t be turned on
•
Reset the device by pressing and holding the reset
button at the bottom. The device will be forced shut
down if it is on and you are required to restart the
device again.
•
Battery has been fully depleted. Please charge the
device via USB or USB adapter.
Device do not charge
•
USB-cable or adapter could be damaged or are
wrong. Use original supplied USB-cabel or adapter.
•
USB-jack of the PC is defective. Try to connect
device to another USB-jack.
Battery life seems short
•
The operating temperature is below 5 X. This is
due to the characteristics of battery and not a
malfunction.
•
The battery is not used for prolonged period.
Please recharge the battery of the device again.
•
The battery is not fully charged. Please charge the
device via USB at least for 1 hours.