Control panel, 1 spin speed reduction button, 2 half-load button l – Инструкция по эксплуатации Zanussi FL 726 CN
Страница 8: 3 anti-crease button u, 4 door opening button q-r, 5 temperature selector dial, 6 operating pilot light, 7 programme selector dial |oò
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
USE
Control panel
1 Spin speed reduction button
By depressing this button the spin speed is
reduced from 700 to 500 rpm in the cotton
programmes and from 550 to 400 rpm in the
gentle programmes.
2 Half-load button l]^
By depressing this button when washing a small
load of cottons or linens (max 1.5 kg) you will
obtain a reduction of the water consumption on
the rinse cycle.
The machine will carry out 3 rinses instead of 4.
3 Anti-crease button U
By depressing this button on programmes H-J-
K-L-M the water of the last rinse is not emptied
out, to prevent the fabrics from creasing. To
drain the water, depress this button again (the
laundry will be gently spun) or select drain
programme "P”.
4 Door opening button
Q-r
Depress it to open the door.
5 Temperature selector dial
Turn this dial to select the washing temperature.
Position = cold wash.
6 Operating pilot light
This light is on whilst the machine is operating
and goes out at the end of the programme.
7 Programme selector dial |oò
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
To start the programme, pull the dial outwards,
to switch off the machine, push the dial inwards.
8