LG V-C446*** - Инструкция (Страница 5)

E
Turbine brush nozzle (23)
- Air adjustment (24)
Slide the air control lever to the right for long
pile carpet and to the left for short pile carpet.
- Cleaning turbine brush nozzle (25)
Slide the air control lever to the right for long
pile carpet and to the left for short pile carpet.
Use the dusting brush & crevoce tool to vacuum
clean the brush and fan.
■ Crevice Tool (8)
For vacuuming in those normally inaccess­
ible places i.e. reaching cobwebs, or down
the side of a sofal
’ Upholstery Nozzle (9)
For vacuuming upholstery, mattresses, etc.
The thread collectors help to pick up the
threads and fluff.
■ Dusting brush (10)
For vacuuming picture frames furniture
outlines, books and other uneven objects.
• Accessory Holder can be attached on the
Extentlon wands using clamping hook. (20)
• Accessories can be stored in the holder. (20)
How to plug in and use
Pull out the mains lead to the desired length
and plug Into the socket.
Adjusting the power level
■ Electronic power control (11)
Suction capacity Increases steplessly up to MAX.
String the cleaner
When you have switched off and unplugged
the appliance, press on the button (19) to
automatically rewind the cord.(depending on
model)
• Use storage clip as shown when storing the
cleaner (12)
Changing the dust bag
The dustbag needs changing when the
cleaner Is set to maximum power and the
cleaner head Is off the floor but the “bag full”
Indicator window (13) Is completely coloured
red.
Even If the dustbag does not appear to be full
at this stage. It should be changed.
It could be that a great deal of very fine dust
has clogged up the pores of the dust bag.
’ Turn off the appliance and unplug It.
• Remove hose.
• Open the cover (14)
• Insert the new paper filter bag into the unit
with the arrow pointing downwards (17)
If your appliance is fitted with a dust bag,
empty It and replace it.
Your appliance Is equipped with either a paper
dust bag or a fabric dust bag (15)
• Push the lever forwards in the direction of
the arrow (16), and pull off the full paper
filter bag towards the rear. Remove the
bag and throw it away.
Note: as the appliance is fitted with a safety
device which checks that the bag Is In place
you cannot close the lid if the bag Is not
fitted correctly.
Cieaning the motor fiiter
The motor filter is situated Inside the
appliance between the dust bag and the
motor. Each time that you change the air
outlet filter we advise you to remove the
motor filter (18) and to clean it by tapping to
remove the dirt and then replacing it in the
vacuum cleaner.
Cleaning the air outlet filters
Depending on the model you have chosen
your appliance Is equipped with different
types of filters : foam filter or electrostatic
filter or antiodour charcoal filter (21)
• To change these filters remove the cover of
the filter compartment (22) situated at the
rear of the appliance, by lifting the little catch.
• The foam filter, should be cleaned regularly
by tapping it to remove the dirt.
• The electrostatic filter or anti-odour charcoal
filter should be changed regularly
(approximately every 6 bag changes)
What to do if your appliance
does not work
Check that the appliance Is correctly plugged
in and that the electrical socket Is working.
What to do when the suction
performance reduces?
' Stop the appliance and unplug It.
' Check that the tubes, flexible hose and
cleaning tool are not blocked.
■ Check that the dust bag Is not full.
Replace it if necessary.
■ Check that the air outlet filter Is not blocked.
Replace It If necessary.
- 5 -