Vitek VT-3978 W - Инструкция (Страница 7)

ENGLISH
7
next instructions to avoid buttery damage:
- install batteries correctly;
- take the batteries out if you are not going to
use the unit for a long time;
- do not recharge batteries, disassemble
them or expose batteries to high
temperatures;
- replace batteries in proper time.
Notice: When the unit is in standby mode it is
still consuming power. In order to switch it off
completely disconnect power cord from a wall
outlet and extract the batteries from buttery
compartment.
Setting time
After connecting the unit to supply line, when
switch FUNCTION is in OFF position the next
indication appears on LCD: «00:00».
You can set time while the player is in standby
mode.
Notice: You can choose between 2 and 2
hours time indication format.
. Press button PROG/CLOCK. String
«CLOCK» appears on LCD. Press button
PROG/CLOCK once more. Indication
«2/2Н:2» appears on LCD. Choose time
indication format (2 or 2 hours) using
buttons
or .
2. Press button PROG/CLOCK to conform
format choice. Clock indication starts
blinking on LCD.
3. Set up clock using buttons or .
. Press button PROG/CLOCK to confirm the
value you have set.
. Set up minutes using buttons or .
6. Press button PROG/CLOCK to confirm the
value you have set.
Basic functions
Adjusting volume level
Use volume control knob to adjust sound vol-
ume level.
Receiving broadcasting stations
. Put switch FUNCTION into position RADIO.
String «TUNER» appears on LCD.
2. Choose frequency band you need: FM, AM
or FM ST (FM stereo) by putting band switch
BAND into adequate position.
If the unit is tuned to station transmitting stereo
signal, indicator FM STEREO is lighted.
3. Choose the station you need by rotating
station tuning knob TUNING.
3978IM.indd 7 07.07.2008 15:17:48