Vitek VT-3476 - Инструкция (Страница 13)

4. Press the PLAY button ( ). The tape starts to
play
Important!
When the tape runs to the end during playing or
recording, any depressed button pops up and
the tape stops.
STOP THE TAPE
Press the STOP/EJECT button ( / ).
• To remove the tape press the STOP/EJECT but-
ton ( / ) once more.
PAUSE
Press the PAUSE button (II) during playing or
recording.
• Press this button again to resume playing or
recording.
FAST FORWARD, REWIND
Press the FF button ( ) or the REW button ( )
while stopped.
• When you have arrived at the place you want,
press the PLAY button ( ).
Important!
•
When the tape runs to the end during fast for-
ward or rewind, any depressed button pops up
and the tape stops.
• This device does not have the song search func-
tion (cue/review) in fast forward and rewind.
Cassette Tapes
Use only normal type tapes (type 1). Do not use
high position tapes (type 2) or metal tapes (type
4).
• Do not use endless tapes.
• Tapes 100 minutes or longer are very thin and
stretch easily. The tape can get tangled in the
machine. Do not use these tapes.
• You cannot record on the leader tape portion of
the tape (the translucent portion). Move forward
past this portion when recording.
• When the tape becomes
loose, use a pencil to take
up the excess slack.
• Do not store tapes in the fol-
lowing locations: In dusty
areas Exposed to magnets
High temperature or high humidity areas
Prevent tape erasure
Use a screw driver to remove the tabs on the top
of the tape to prevent accidental tape erasure.
If you mistakenly remove a tab and you would
like to record on the tape, cover the remaining
hole with cellophane tape.
LISTENING TO THE RADIO
1. Move the FUNCTION switch to RADIO.
2. Move the BAND switch to AM or FM.
3. Turn the TUNER dial until you arrive at the sta-
tion you want to hear.
FM: 88-108 MHz AM: 530-1600kHz
FM STEREO RECEPTION
You can use the BEAT CANCEL switch on the
rear of the device to switch between stereo [FM
ST] and mono [MONO]. When the switch is posi-
tioned on FM ST you will automatically hear the
station in stereo when broadcast in stereo.
• When the broadcast is in stereo the FM STEREO
lamp will illuminate.
• When the reception is poor, switch to MONO to
hear the broadcast more clearly.
• This device does not support AM stereo broad-
casts.
RECORDING
1. Press the STOP/EJECT button ( / ) to open
ENGLISH
13
3476.qxd 01.04.2005 22:13 Page 13