Vitek VT-3468 - Инструкция (Страница 6)

ENGLISH
CONTROLS AND FUNCTIONS
CONNECTING THE APPLIANCE TO A TELEVISION SET:
1. To connect the appliance to a television set through a SCART type cable, you must use an RCA-to-
SCART adapter, which can be purchased wherever audio-video equipment is sold.
2. To play NTSC disks, you must connect the appliance to a multi-system or NTSC television set.
3. Before connecting this appliance to a television set, make sure that it is turned off, and the power
cord is disconnected from the AC power outlet.
4. Do not close the ventilation openings on either of the appliances and place them in a way that
allows air to circulate freely.
5. Before connecting the appliance to another appliance, read the instructions for the other appliance
completely.
6. When connecting audio/video cables, observe color coding.
7. During playback, the volume of the television set may be less than when receiving broadcasts pro-
gramming. If this happens, set the volume to a desired level.
8. For correct connection of the unit to a TV-set by audio/video RCA-cable follow the diagram below
NOTE: If the appliance is not connected correctly to a television set, the audio or video might not
function properly. If this happens, disconnect the power source, check all connections, and turn the
appliance on once again.
LIQUID CRYSTAL DISPLAY (31)
1. Shows when CDs and VCDs are being
played.
2. Shows when the REPEAT all tracks func-
tion is turned on.
3. Shows the sequence number of the track
being played or the total number tracks on
the disk.
4. Shows when the REPEAT function is
turned on.
5. Shows when the REPEAT A-B function is
turned on.
6. Shows the minutes portion of the time
count of the track being played.
7. Shows when the REPEAT one track function is turned on.
5