Toshiba BDX1200 - Инструкция (Страница 18)

1
E
ng
lis
h
Display Setting
1. Press.SETUP, [General Setting] menu
is.displayed.
2. Press  to.select.[Display Setting],
then.press..
3. Select.an.option,.press  to.access.
TV Screen 16:9 Full
Auto
Off
Video Process
Motion Vide... Resolution
Color Space YCbCr422
HDMI Deep Color
Display Setting
SETUP Exit
TV
HDMI 1080/24p
Move cursor key to select menu option
then use “OK ” key to select
On
4. Press / to.select.a.setup.option.and
press .
5. Select.the.setting.you.wish.to.change
and press OK to confirm.
-.Press  to.return.to.the.previous.
menu.
-.Press SETUP.to.exit.the.menu..
[TV]
• [TV Screen]
Select.the.screen.format.according.to.
how.you.want.the.picture.to.appear.on.
the.TV.
{16:9 Full}.–.for.a.disc.with.the.aspect.
ratio.of.4:3,.the.output.video.is.
stretched.into.16:9.full.screen.
{16:9 Normal}.–.for.a.disc.with.the.
aspect.ratio.of.4:3,.the.output.video.is.
resized.vertically.to.match.what.will.be.
seen.on.the.display.
{4:3 Pan&Scan}.–.for.standard.TV,.
Display.a.wide.picture.on.the.entire.
screen.and.cuts.off.the.redundant.
portions.
{4:3 Letterbox}.–.for.standard.TV,.
Display.a.wide.picture.with.two.black.
borders.on.the.top.and.bottom.of.4:3.
screen.
• [Resolution]
Select.a.video.output.resolution.that.is.
compatible.with.your.TV.display.
capability.
{Auto}.–.Select.the.most.suitable.
resolution.according.to.the.TV..
{480i/576i},.{480p/576p},.{720p},.
{1080i},.{1080p}.
–.Select.a.video.resolution.setting.that.
is.best.supported.by.the.TV . See.TV.
manual.for.details.
Note:
-When resolution is set to 720p/1080i/1080p:
(1) If only CVBS connected, the resolution of CVBS
video output will be set to 480i/576i automatically.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
Out Of Range:Check Display Resolution
• [Color Space]
Select a predefined Colour space of
picture.
{RGB}.–.Select.RGB.Colour.space.
{YCbCr}.–.Select.YCbCr.Colour.space.
{YCbCr422}.–.Select.YCbCr422.Colour.
space.
{Full RGB}.–.Select.Full.RGB.Colour.
space.
• [HDMI Deep Color]
This.feature.is.available.only.when.the.
display.device.is.connected.by.a.HDMI.
cable,.and.when.it.supports.deep.Colour.
feature.
{30 bits}.–.Output.30.bits.Colour.
{36 bits}.–.Output.36.bits.Colour.
{Off}.–.Output.standard.24.bits.Colour.
Note:
-When the colour space is "YCbCr422", even if
HDMI Deep Color is set to 30bits/36bits, it is not
output with Deep Colour.
• [HDMI 1080
/24p]
{On}.–.Enable.1080/24p.video.
resolution.setting.
{Off}.–.Disable.1080/24p.video.
resolution.setting.
Notes about HDMI 1080/24p:
If you want the 24Hz output, it should fulfill below
3 conditions:
1. TV supports the 24Hz display;
2. Player choose the 24Hz option in the setup
menu;
3. Media must be the 24Hz video.
Notes:
- This resolution becomes effective only when
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
[Video Process]
TV Video Adjust More...
Low
Video Process
Motion Video...
Sharpness
Display Setting
SETUP Exit
Move cursor key to select menu option
then use “OK ” key to select