Trouble check – Инструкция по эксплуатации Sony CCD-TRV3E

Страница 83

Advertising
background image

83

Additional information

Дополнительная информация

Trouble check

Picture

Symptom

Cause and/or Corrective Actions

• The START/STOP MODE switch is set to 5SEC or

.

m Set it to

. (p. 20)

• The battery is dead.

m Use a charged battery pack or the AC power adaptor.

(p. 9, 31)

• Moisture condensation has occurred.

m Remove the cassette and leave the camcorder for at least 1

hour. (p. 75)

• You pressed DATE and TIME together for more than 2

seconds.

m The camcorder is not malfunctioning. You may start

recording. Flashing will stop soon.

• The lithium battery is weak or dead.

m Replace the lithium battery with a new one. (p. 65)

• The POWER switch is set to CAMERA or OFF.

m Set it to VTR/PLAYER.

• The tape has run out.

m Rewind the tape or use a new one. (p. 27)

• STEADYSHOT is set to OFF.

m Set it to ON. (p. 60)

• The Steady Shot function does not work when the wide mode

is set to 16:9 FULL.

• FOCUS is set to MANUAL.

m Set it to AUTO. (p. 49)

• Shooting conditions are not suitable for autofocus.

m Set FOCUS to MANUAL to focus manually. (p. 49)

• The START/STOP MODE switch is set to 5SEC or

.

m Set it to

. (p. 20)

• The stereo tape is played back with HiFi SOUND set to 1 or 2 in

the menu system.

m Set to STEREO in the menu system. (p. 38)

• The picture has been recorded with WIND set to ON in the

menu system.

m When there is no wind, set it to OFF. (p. 36)

• Reset the date and time. (p. 67)

Recording stops in a few seconds.

The date or time indicator
disappears.

Excessive high-pitched sound is
heard. (CCD-TRV65E only)

The fader function does not work.
(CCD-TRV23E/TRV35E/TRV65E
only)

The autofocusing function does not
work. (CCD-TRV23E/TRV35E/
TRV65E only)

The Steady Shot function does not
activate. (CCD-TRV35E/TRV65E
only)

The tape does not move when a
video control button is pressed.

No sound or only a low sound is
heard when playing back a tape.
(CCD-TRV65E only)

The date or time indicator is flashing.

{

and 6 indicators flash and no

function except for cassette ejection
works.

The cassette cannot be removed from
the holder.

Symptom

Cause and/or Corrective Actions

• The viewfinder lens is not adjusted.

m Adjust the viewfinder lens. (p. 16)

The image on the viewfinder screen
is not clear.

(to be continued)

Advertising