Switching between anynet, Devices – Инструкция по эксплуатации Samsung PS58B850Y1W
Страница 54
English - 54
Switching between Anynet
+
Devices
1. Press the TOOLS button. Press the ENTERE button to select Anynet
+
(HDMI-CEC).
2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet+ devices connected to the TV are listed. If you cannot find a device you
N
want, press the red button to scan for devices.
Only when you set
N
Anynet
+
(HDMI-CEC) to On in the Setup menu, the Device List
menu appears.
3. Press the ▲ or ▼ button to select to a particular device and press the ENTERE
button. It is switched to the selected device.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
N
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
N
If you have selected external input mode by pressing the
N
SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet
+
device by using the
TOOLS button.
Anynet
❑
+
Menu
The
Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV.
Anynet
+
Menu
Description
View TV
Anynet
+
mode changes to TV broadcast mode.
Device List
Shows the Anynet+ device list.
(device_name) MENU
Shows the connected device menus. E.g.
If a DVD recorder is connected, the disc menu of the DVD recorder will appear.
(device_name) INFO
Shows the play menu of the connected device. E.g.
If a DVD recorder is connected, the play menu of the DVD recorder will appear.
Recording: (*recorder)
Starts recording immediately using the recorder.
(This is only available for devices that support the recording function.)
(*recorder) Reserve Recording
Enables reserving a recording for the recorder.
(This is only available for devices that support the recording reservation function.)
Stop Recording: (*recorder)
Stops recording.
Receiver
Sound is played through the receiver.
TV Remote Control Buttons Available in Anynet+ Mode
❑
Device Type
Operating Status
Available Buttons
Anynet+ Device
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
Numeric buttons
▲/▼/◄/►/
ENTERE buttons
Colour buttons /
EXIT button
After switching to the device, while
playing a file
(Backward search) /
(Forward search)
(Stop) /
(Play) /
(Pause)
Device with
built in Tuner
After switching to the device, when you
are watching a TV programme
P
/
button
Audio Device
When Receiver is activated
=
/ button
MMUTE button
The Anynet+ function only works when the active source on the TV remote control is set to TV.
N
The
N
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.
N
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
N
The Anynet+ functions do not operate with other manufacturers’ products.
N
The
N
,
operations may differ depending on the device.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it
N
will be represented as (*device_name).
U
Move
E
Enter
R
Return
View TV
Device List
Recording
: DVDR
DVDR MENU
DVDR INFO
Receiver
: On
Setup
BN68-02334EGH-Eng.indb 54
2009-06-09 �� 4:21:00