19 adjusting picture settings, Adjusting picture settings – Инструкция по эксплуатации Samsung PE43H4000AK
Страница 65
English - 19
English
Adjusting Picture Settings
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
✎
NOTE
• In analogue
TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available.
• Settings can be adjusted and stored for each external device connected to the TV.
• Lowering picture brightness reduces power consumption.
Picture Size
O
MENUm → Picture → Picture Size → ENTERE
Set the various picture options such as picture size and aspect ratio.
✎
The available items may differ depending on the selected mode.
✎
Depending on the input source, the picture size options may vary.
•
Picture Size t: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we
highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using
▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
✎
Adjusts the Zoom or Position by using
▲, ▼ button.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the
screen may cause image retention (screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i /
1080p) signals are inputted.
•
Zoom/Position: Adjust the picture size and position. It is only available in Zoom.
•
Position: Adjust the picture position. It is only available in Screen Fit or Wide Zoom.
✎
NOTE
• After selecting
Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to
centre the picture:
1. Select the Position. Press the
ENTER
E button.
2. Press the
▲, ▼, ◄ or ► button to move the picture.
• If you want to reset the position you adjusted, select
Reset in the Position screen. The picture will be set to its
default position.
• If you use the
Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in
the overscan function.
•
4:3 Screen Size: Available only when picture size is set to Auto Wide. You can determine the desired picture
size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different
picture size.
[PH4000-RU]BN68-05792L-00L04.indb 19
2014-02-03 7:22:00