SIGMA BC 1609 STS - Инструкция (Страница 12)

12
5 Connection / Pairing / Tahdistus
Installation of the BC 1609 STS into the mounting bracket – The zeros
on the speed and cadence are flashing. To synchronise the speed and
cadence there are 2 options:
1 Set off, usually the receiver has paired with the transmitter within
3 or 4 wheel turns.
2 Turn front wheel or pedals until the KMH or cadence display stops
flashing. Removing the BC 1609 STS from the mounting will cut off the
connection.
TOO MANY SIGNALS are shown: Extend the distance of all
transmitters and press any button to continue. Pairing begins again.
(If tranmission fails whilst cycling and no longer works, please press the MODE 1 button
for more than 3 sec. to start manual pairing. SYNCH RESET flashes on the display.)
Pres BC 1609 STS fast på holderen.
Hastighedens- og trædefrekvensens nuller blinker.
Til synkronisering af hastigheden/ trædefrekvensen findes der 2 muligheder:
1 Kørsel i frihjul, som regel er modtageren pairet med senderen efter 3 til 4
hjulomdrejninger.
2 Drej forhjul hhv. pedaler til KMH- hhv. trædefrekvens holder op med at
blinke.
1
2
1609
DK
GB
US
12