1 cleaning the door gasket, 2 shelf supports, Removing the shelf supports – Инструкция по эксплуатации Electrolux EOB6850AOX

Страница 33: Installing the shelf supports, 3 oven lamp

Advertising
background image

• Clean the oven interior after each use.

Then you can remove dirt more easily
and it does not burn on.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all oven accessories after each

use and let them dry. Use a soft cloth
with warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can destroy nonstick coating.

Stainless steel or aluminium
appliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the oven sur-
face. Clean the oven control panel
with the same precautions.

12.1 Cleaning the door gasket

• Regularly do a check of the door gas-

ket. The door gasket is around the
frame of the oven cavity. Do not use the
appliance if the door gasket is dam-
aged. Contact the Service Centre.

• To clean the door gasket, refer to the

general information about cleaning.

12.2 Shelf supports

You can remove the shelf supports to
clean the side walls.

Removing the shelf supports

1.

Pull the front of the shelf support away
from the side wall.

2

1

2.

Pull the rear end of the shelf support
away from the side wall and remove
it.

Installing the shelf supports

Install the shelf supports in the opposite
sequence.

The rounded ends of the shelf
supports must point to the front.

12.3 Oven lamp

WARNING!
Be careful when you change the
oven lamp. There is a risk of elec-
trical shock.

ENGLISH

33

Advertising