Xoro HSD 2100 - Инструкция (Страница 75)

CHAPTER 4
THE SETUP MENU SYSTEM
The system setup options are illustrated below:
According to the Color System of the TV, you
can choose the TV System.
NTSC: Choose this settings if your DVD
player is connected to a NTSC TV.
PAL60: Choose this settings if your DVD
player is connected to a PAL60 TV.
PAL: Choose this settings if your DVD
player is connected to a PAL TV.
AUTO: Choose this settings if your DVD
player is connected to a multi-system TV.
The default setting is NTSC.
If the screen saver is on, when your DVD
player is in Stop, Open, or No Disc state, or
there is a frame frozen for more than 60sec,
the screen saver will be displayed. This
feature can protect the screen from damage.
ON: Choose this setting to activate the
screen saver.
OFF: Choose this setting to cancel the
screen saver. The default setting is ON.
Interlace-YUV: Choose this setting if your
DVD player is connected to a TV with Y,
Cb, Cr video cables.
TV-RGB: Choose this setting if your DVD
player is connected to a TV with an S-
Video cable or composite video cables.
P-SCAN: Choose this setting if your DVD
player is connected to a progressive scan
TV with Y, Cb, Cr video cables.
PC-VGA: Choose this setting if your DVD
player is connected to a progressive scan
TV or a monitor with a VGA video cable.
S-VIDEO: Choose this setting if your DVD
player is connected to a TV with an S-
Video cable.
l
l
l
l
l
l
l
l
l
l
l
TV SYSTEM
SCREEN SAVER
VIDEO
75
System setup
Notes:
l
l
l
l
When your DVD player output composite video, you can choose the setting randomly.
Choose TV-RGB / P-SCAN if your DVD player is connected to a progressive scan TV.
The default setting is S-VIDEO.
When your DVD player output composite video, you can choose the setting randomly.
Choose TV-RGB / P-SCAN if your DVD player is connected to a progressive scan TV.
The default setting is S-VIDEO.