ViTESSE VS-230 - Инструкция (Страница 4)

www.vitesse.ru
P/5 P/6
- Press the ingredients slowly and steadily down with
the pusher (Fig 16)
- Press the side of the cutter that has the word “Push
Up” out of the disc with the toe. (Fig 17)
KNEADING ACCESSORY:
Function:
The kneading accessory can be used for kneading bread
dough and for mixing batters and cake mixtures.
How to Use:
- Put the bowl on the housing and fit the kneading
accessory onto the driving shaft. (Fig 18)
- Put the ingredients in the bowl and fasten the lid onto
the bowl. (Fig 19. 20)
- Put the pusher in the inlet to close it (Fig 21)
- Set the speed control to position 3. (Highest Speed),
ready after 1~3 Minutes.
BLENDER:-
Important:-
1. The appliance must be used together with the bowl
and the bowl lid. If you use appliance without the
blender, the appliance will not function if the housing
cap has not been fixed onto the attaching hole for the
blender.
2. Before Use: do not put the main plug in the socket
until you have attached the blender jar and the
housing cap in the correct way.
3. After use: Unplug the appliance before you remove
the blender jar from the housing.
4. Do not full the blender jar with the ingredients that are
hotter than 80 Degree Celsius.
5. To prevent spilling, do not put more then 1.5 liters of
liquid in the blender jar.
6. Never remove the lid while the blender is running.
7. Notice: Always remove the lid from the blender jar
before mounting and dismounting the blender jar.
8. Do not operate the blender attachment over 3
minutes.
Function:-
The blender can be used for pureeing very finely and for
blending. It can be used for e.g. soups, sauces, milk
shakes, baby food, vegetable, fruit thin batter, puree,
etc., if necessary, cut solid ingredients into smaller
pieces before you put them in the blender.
How to use the Blender:-
- Remove the housing cap (Fig 22)
- Press the lid into place and turn it anti-Clockwise into
it is firmly fixed (Fig 23)
- Mount the blender jar onto the attaching hole and turn
it clockwise until it is firmly fixed (Fig 24)
- Put the ingredients in the blender jar (Fig 25, 26)
- Attach the stopper by pressing it down (Fig 27)
- Assemble the bowl and the bowl lid by twisting the lid
until to its fixture in the clockwise direction.
- Switch on the appliance by setting the speed control
to the recommended speed.
TIPS:-
1. The opening in the lid can be used to add ingredients
while the appliance is running. To do so, remove the
stopper from the lid.
2. It may be necessary to switch off the appliance from
time to time to remove pieces of flood sticking to the
inside of the blender jar.
- Switch off the appliance and unplug it.
- Remove the stopper and the lid
- Remove the pieces sticking to the inside of the
blender jar with a soft spatula.
Keep the spatula at a safe distance from the knives.
- Turn the blender jar anti-clockwise. Take out the
blender jar (Fig 28)
- Turn the lid clockwise (Fig 29)