Binatone MHS-1105 - Инструкция (Страница 6)

6
OPERATING INSTRUCTIONS
1. Attach the chosen attachment
For the hair dryer: attach the hair dryer (9)
directly to the handle (1) by the locking ring
(6) without using heating rod (3). Combine
2 pins in the attachment (9) with the appro-
priate holes in the handle (1). Turn the lock-
ing ring (6) as indicated on the handle (1)
to lock the attachment.
For other attachments: put any of them (5, 7, 8) on the
heating rod (3) till click. Attach the rod (3) to the handle (1)
and fix it turning the locking ring (6) in the direction shown on
the handle.
Note : if an attachment is changed by you while the
appliance is in operation be careful because the metal
parts are heated. While changing attachments touch
only plastic non-heated parts of the appliance.
For changing straightening and crimping plates you need
to pull the plates with an effort. Then just turn over the plates. To
insert the plates clip them as far into the casing as they will go.
2. Plug the appliance in for operation.
3. Switch the temperature mode selector to I or II position.
Use of hair dryer (9)
1. Speed selection:
0 – shut off
I – gentle airflow for elaborate hair styling
II – strong airflow for quick hair drying
2. Use of air concentrator (11)
Attach the concentrator (11) to the outlet (10). Set the re-
quired speed and temperature setting.
Styling hair
1. Straightening attachment (8)
Take a lock and beginning from the roots of your hair, move the
appliance slowly and smoothly down to the lock tip, straighten-
ing and smoothing it. To achieve better results tighten the
plates. If your hair is thick and styled with difficulty, increase
the duration of the procedure.
BEFORE FIRST USE
! Remove all labels from the appliance, wipe it
with soft fabric and put it on a dry plain
surface.
! To achieve the optimum effect use hair styl-
ing products.