4 upgrading the firmware, 5 appendixes 5.1 specifications – Инструкция по эксплуатации Acme DP02
Страница 60
60
GB
such as Internet Explorer, Firefox or Safari, and at the address bar, key in either
-
http://123.456.789.000:1024 where 123.456.789.000 is the WAN IP address
of your router. Please refer to your router documentation on getting this
information from your router.
Or
-
Key in http://DDNS-HOST-NAME:1024, where DDNS-HOST-NAME is the host
name which you have signed up for at your desired DDNS service provider.
4 UPGRADING THE FIRMWARE
The firmware is the operating system (OS) installed on the device. Firmware
upgrades can bring new features, improvements and bug fixes.
Step 1, Copy ‘install.img’ to the root directory of a USB stick, and connect it to the
USB HOST port of the player.
Step 2, Press and hold the Power button on the front panel, and keep on holding.
Step 3, Plug the power cable into the DC IN jack, wait for about 5 seconds or more,
and then take your finger off the Power button;
Firmware installation will start. There is another way for upgrading. Please refer to
USB Update in chapter ‘3.1.6 Miscellaneous’ for more details.
5 APPENDIXES
5.1 Specifications
I/O INTERFACES SUPPORTED:
• Built-in WiFi module (802.11b/g/n)
• 3.5’’ SATA HDD
• USB 3.0 Device port (compatible to USB 2.0 )
• USB 2.0 HOST port (compatible to USB 1.1)
• Memory Card slot (supports SD/MMC)
• Composite (CVBS) A/V jack
• Component Y/Pb/Pr jack
• ANT.RF IN/OUT socket
• HDMI V1.3 interface
• S/PDIF Optical & Coaxial jack
• DC-IN 12V 2A