Acme DP02 - Инструкция (Страница 59)

59
GB
• BitTorrent Management
View and manage your BitTorrent tasks remotely over the internet.
HTTP Server Configuration
On your product,
- Assign a manual Fixed IP address for the product, for example 192.168.0.9
when you connect to your router either via wired or wireless connection.
- Assign the same subnet mask as your router, usually 255.255.255.0 and the
gateway of your router (router’s local IP address, usually 192.168.xxx.xxx).
Please refer to your router documentation on getting this information from your
router.
- Key in your router DNS IP address (primary or secondary)
On your router,
-
Configure HTTP Server within your router’s Virtual Server setting and key in
the above IP address in example, 192.168.0.9 and change the public port to
1024 and private port to 80 which is the default.
- For your convenience, you can also choose to enable Dynamic DNS and sign
up for a free DDNS domain at any of the website providing such free services.
An example would be www.dyndns.com
- At your router’s DDNS page, key in your host name and enter the same user
name and password when you create a DDNS account. Please refer to your
router documentation on getting these information from your router.
To access via HTTP server in your local network, launch a web browser such as Internet
Explorer, Firefox or Safari, and at the address bar, key in http://192.168.0.9:1024
where 192.168.0.9 is the IP address of your product.
To access via HTTP server from out of your local network, launch a web browser