Acme DVBT-02 - Инструкция (Страница 17)

17
GB
password of Confirm password once again
when they are not the same.
3.6 OSD Setting
1. OSD Timeout: Press
keys toselect
from 1 to 10 by step1. The default values Is 5.
2. OSD Transparency: Press keys to
select among Off, 10%, 20%, 30%, 40%. The
default option is Off.
Press MENU or EXIT key to save and exit.
3.7 Favorite
There are 32 favorites group listed in this
window. Press PR+, PR- keys to select one and
press OK key to the Rename window. Since the
same operation as the above the Add Satellite
window, here we don’t explain any more.
4. Tools
1. Press OK key or key to pop up the “Input
Password” dialogue, you can not enter into the
menu unless the correct password is inputted.
The default password is 0000.
2. Press PR+, PR- keys to move the cursor up
or down.
3. Press EXIT key or key to move the focus to
the left menu.
4.1 Receiver Information
When you enter Receiver Information menu,
you should see the screen like it displays on the
right.This screen displays receiver information.
You should press [EXIT] key to cancel this menu.
4.2 Load FactoryDefault
When you choose the option of Load Factory
Default and press [OK] key, there will be a
dialogue for you to input the password. The
default password is 0000. If you input the correct
password, you will see a screenlike beside. If you
choose Yes, all the parameters of this receiver
will reset tothe default value.
Note: Please use this function carefully.
Main menu