Acme DVBT-02 - Инструкция (Страница 14)

14
GB
Main menu
2. Installation
1. Press OK key or key to pop up the “Input
Password” dialogue, you can not enter into the
menu unless the correct password is inputted.
The default password is “0000”.
2. Press PR+, PR- keys to move the cursor up
or down.
3. Press EXIT key or key to move the focus to
the left menu.
2.1 Auto Scan
When you enterAuto Scanmenu, the screenwill
display asbelow.
In FTA Only, press [Left/Right] key to choose Yes
or No. Move the highlight on the search option,
and press [OK] key tostart scanning.
Press [EXIT] keyto exit thismenu.
2.2 Channel Scan
When you enter Channel Scan, the screen will
display as beside.There are two scan modes for
you. You can choose to scan by channel or by
frequency.When scan band is UHF and region
is “China”, the range of Ch Number is from 13 to
61. When scan band is VHF and region is “China”,
the range of Ch Number is from 1 to 12. (It’s
according to region.)When you complete your
configuration, move highlight to search option,
and press [OK] key to start scanning.Press [EXIT]
key to exit the scanning and save the current
parameters.
2.3 Aerial Adjustment
When you enter Antenna feeding, the screen
will display as beside. In CH No. submenu, press
[Left/Right] key to choose the channel.
In Tuner Power submenu, press [Left/Right] key
to choose Off and On.
2.4 LCN
Press [Left/Right] keyto choose Onand Off.