English, Useful tips, Selection of temperature settings – Инструкция по эксплуатации Binatone SI-4024
Страница 9: Ironing of selected fabrics
9
ENGLISH
down over the sink. Store the appliance in the upright standing
position.
USEFUL TIPS
Selection of temperature settings
! Before ironing, we recommend that you orga-
nize your clothes, into the types of material
and the recommended temperature settings.
! We recommend that you start ironing, using
the lower temperature settings first: the appli-
ance gets hot quicker than it cools down.
! When ironing articles made with combinations of fibers, start
with the temperature recommended for the most delicate ma-
terial first (for example, to iron a cloth made of cotton and
polyester select the temperature recommended for ironing
polyester first).
! If the manufacturer’s label, which gives the recommended
temperature, is missing and the type of material is known,
follow the recommendations below.
Fabric type
Temperature
Steam ironing
control settings
Acrylic
Polypropylene
•
No
Polyethane
Acetate
Triacetate
Polyester
Polyamide
••
Yes
Nylon
Viscose
Rayon
Silk
••
Not recommended
Wool
••
Yes
Cotton
•••
Yes
Linen
•••
Yes
! If you do not know the fabric type, find a place on the article;
which will not be seen and test iron it to select the appropriate
temperature, start with the minimum setting.
Ironing of selected fabrics
! Do not use the water spray button (7) while ironing silk ar-
ticles: drops of water leave spots on silk garments.
! Wool, velour, velvet and similar pile fabrics must be ironed on
the inside.
! To prevent shiny marks we recommend that you iron woolen
articles through a thin cotton cloth, set the steam control knob
into the maximum position.