TELEFUNKEN TF-SP5302 - Инструкция (Страница 10)

Operation
Operation
10
select “Settings”. In section
“Display” select “Wallpaper”.
Select a picture available on the
device. Click “Set Wallpaper”.
Upgrade basic software
(OS)
• In the page of this model on
the manufacturer’s website you
can find the current version and
update the OS (if any). Do not
use the OS from other models,
because they are incompatible
and cannot provide full and stable
operation of the device.
• If your device is working
properly, do not update the
software, since it is quite possible,
the device has a newer version of
the software.
• Before upgrading/replacing
the OS make sure that the OS
is designed for models with the
same serial numbers as your
device (the serial number is on
the back panel of your device). To
perform the upgrade/replacement
of the OS, follow the instructions
posted on the page model on the
manufacturer’s website.
Connections
Connecting to Wi-Fi
• Click the applications menu
button in the top right corner
of the main screen, in the tab
“Applications” select “Settings”.
In section “Wireless & Networks”
click Wi-Fi to set into the ON
position.
• Connecting to the network:
The system automatically detects
available Wi-Fi-networks and
displays their names; select a
network you want to connect
and, if necessary, enter the
password. When the connection
is successful, the display shows
the Wi-Fi icon in the notification
area. The number of blue sectors
of the icon shows the level of
Wi-Fi signal.
To add a Wi-Fi network
to the list, click “Add Network”
in the top right corner, then use
the pop-up keypad to enter the
network name and click “Save”.
3G connectivity
Insert a 3G SIM-card into the
appropriate slot of the unit. Click
the applications menu button (4)
in the top right corner of the main
screen, in the tab “Applications”
select “Settings”. In “Wireless &
Networks” select “More ...”. Click
on “Mobile Networks”, put a tick
next to «Modem power» and
enter the PIN-code. In the “Mobile
network settings”, select “Access
Point». Select your access point
from the list or adjust manually.
When a successful connection is
performed,
icon appears in
the system tray.
When using a device