Petsafe Drinkwell Mini - Инструкция (Страница 69)

www.petsafe.net 69
PUMP MAINTENANCE
Cleaning the pump is essential to the longevity of the fountain,
as well as the cleanliness of the water.
Clean the pump every 2 weeks.
IMPORTANT: Warranty may be voided if the motor is not cleaned.
1) Remove the Pre-filter and Housing from the bowl.
2) Gently lift the pump out of its resting place. Suction cups on the
bottom of the motor will hold it in place. A small amount of force
may be necessary.
3) Once the pump is out of the fountain, with your thumb and fore-
finger, gently squeeze on either side of the intake plate, and pull
off. It may be necessary to insert a fingernail into the seam of the
intake plate to pry it off. (Fig. 4a & 4b)
4) Next, you will want to remove the stator by placing your finger
nail under the small lip located on the narrow side of tear drop
shaped stator and pull out. (Fig. 4c & 4d)
Pump Impeller Stator Intake Plate Flow Control
Knob
Fig. 4a Fig. 4b
Fig. 4c Fig. 4d
Stator
Pull-Tab