Harman-Kardon BDT-3 - Инструкция (Страница 5)

English
Unpacking
The carton and shipping materials used to protect your new player during shipment were
specially designed to cushion it from shock and vibration. We suggest that you save the
carton and packing materials for use in shipping if you move or if the unit ever needs
repair.
To minimize the size of the carton in storage, you may wish to flatten it. you can do it by
carefully slitting the tape seams on the carton’s bottom and collapsing it. you can store
cardboard inserts in the same manner. Packing materials that cannot be collapsed should
be saved along with the carton in a plastic bag.
If you do not wish to save the packaging materials, please note that the carton and
other sections of the shipping-protection materials are recyclable. Please respect the
environment and discard those materials at a local recycling center.
Remove the protective plastic film from the front-panel lens. leaving the film in place will
affect the performance of your remote control.
Installation Location
• To ensure proper operation and to avoid the potential for safety hazards, place
the unit on a firm and level surface. When placing the unit on a shelf, be certain
that the shelf and any mounting hardware can support the weight of the product.
• Provide proper space both above and below the unit for ventilation. If this product
will be installed in a cabinet or other enclosed area, make certain that there is
sufficient air movement within the area. under some circumstances, a fan may
be required.
• do not place the unit directly on a carpeted surface.
• Avoid installation in extremely hot or cold locations, or in an area that is exposed to
direct sunlight or heating equipment.
• Avoid moist or humid locations.
• do not obstruct the ventilation slots on the top and sides of the unit or place objects
directly over or next to them.
• do not place the BdT 3/BdT 30 directly on top of a product that generates
excessive heat.
• due to the heat generated by the player and other components in your system,
there is the remote possibility that the rubber padding on the bottom of the unit’s
feet may leave marks on certain wood or wood-veneer materials. use caution
when placing the unit on soft woods or other materials that heat or heavy objects
may damage. some surface finishes may be particularly sensitive to absorbing
such marks, due to a variety of factors beyond harman kardon control, including
the nature of the finish, cleaning materials used, normal heat and vibration caused
by the use of the product, or other factors. your warranty will not cover this type of
damage to furniture, so exercise caution in choosing an installation location for the
component and in performing normal maintenance practices.
• your new harman kardon Blu-ray disc ™ player requires a broadband Internet
connection for Bd-live ™ interactivity.
Cleaning
• When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only
after unplugging the Ac power cord, wipe it with a soft cloth dampened with mild
soapy water, then a fresh cloth with clean water. Wipe it dry immediately with a
dry cloth. NeveR use benzene, aerosol cleaners, paint thinner, alcohol or any other
volatile cleaning agent. do not use abrasive cleaners, as they may damage the
finish of metal parts. Avoid spraying insecticide near the unit.
Please register your product on our Web site at
www.harmankardon.com.
Note: you’ll need the product’s serial number.
At the same time, you can choose to be
notified about our new products and/or special
promotions.
Thank You for Choosing Harman Kardon ® Products!
for more than fifty years, harman kardon products have been at the cutting edge of audio
and home theater technology. The first audio receiver wore a harman kardon badge, and
the company has been producing innovative entertainment products ever since. The BdT
3/BdT 30 Blu-ray disc ™ player is the latest component offered in that proud tradition.
Incorporating the latest 3-d, high-definition audio and video processing technologies, the
BdT 3/BdT 30 is an essential part of a modern home theater system. It plays your favorite
Blu-ray disc movies with up to 1080/24p video resolution when available on the disc, and
thanks to hdMI ® (high-definition Multimedia Interface ® ) 1.4a with 30/36-bit deep color
connectivity, lets you experience the latest 3-d home entertainment when you connect
it to a 3-d-capable Tv.
connect the BdT 3/BdT 30 to the Internet, and Bd-live
™ interactivity (available with
compatible discs) delivers additional features, updates and news of live events. even your
older dvd-video discs will deliver outstanding picture quality when they are upscaled to
1080p video resolution.
yet with all of its sophistication, the BdT 3/BdT 30 is simple to operate. Its controls are
similar to those of dvd players, and its enhanced on-screen menu system guides you
every step of the way. easy to use and delivering outstanding performance, the BdT 3/
BdT 30 is sure to provide enjoyment for many years to come.
If you have any questions about this product, its installation or its operation, please
contact your retailer or custom installer, or visit the harman kardon Web site at
www.harmankardon.com.
NOTE: your Blu-ray disc player is designed and manufactured for compatibility
with region management information that is encoded on most Blu-ray disc
recordings and dvd recordings:
• BDT 3 units are designed only for playback of discs with Blu-Ray disc
Region code A and dvd Region code 1 information, or for discs that
do not contain any Region code information.
• BDT 30 units are designed only for playback of discs with Blu-ray disc
Region code B and dvd Region code 2 information, or for discs that do
not contain Region code information.
1 2
If there is a Region code on a disc other than the one your BdT player is
designed for, it will not play in your BdT player.
5
Unpacking
BDT 3/BDT 30