Hyundai H-CMMD4048 - Инструкция (Страница 12)

12 13
Operation Operation
General operations
Touch screen
Due to the touch screen, you can fulfill most
functions not only by pressing buttons but also
by touching the options you need.
Reset the unit
Operating the unit for the first time or after
replacing the car battery, you must reset the
unit. Press RES button on the unit with a
pointed object (such as a ballpoint pen) to set
the unit to initial state.
When some errors occur on the display,
you can also press RES button to resume to
normal, and it will erase the clock setting and
some memorized functions.
Turning the unit on/off
Press PWR/SOURCE button on the RC or
PWR/SRC button on the panel to turn on the
unit. Press and hold the button more than 2
seconds to turn off the unit.
Open the monitor
Press OPEN button on the unit to open the
monitor. Press the button again, the monitor
returns to the previous state.
Angle setting
You can adjust the desired angle of the
monitor. Press ANGLE and ANGLE
buttons to adjust monitor backward or forward
by definite angle.
Please do not adjust the monitor tilt
manually, otherwise it can get damaged.
Volume control
Press VOL+/VOL- buttons on the RC or
rotate VOL regulator on the unit to increase/
decrease the sound level.
Setting the sound characteristics
Repeatedly press SEL button on the RC or
on the unit to select the desired parameter in the
following order: VOL => BAL => FAD => BAS
=> TRE => WOO. After selecting the desired
parameter, you can adjust its current level by
pressing VOL+/- buttons on the RC or rotating
VOL knob on the unit.
Mute function
Press button on the RC or MUTE button
on the unit to turn off the sound. Press the
button again or adjust volume to resume the
sound output.
Equalizer setting
While listening to music, you can select
the corresponding preset modes to adjust
the sound quality perfectly by using AF/EQ
button on the RC. Press and hold the button
repeatedly to choose the following modes in
turn: POP => CLASS => ROCK => JAZZ =>
Off (no equalizer).
Loudness
Press and hold TA/LOUD button on the RC
or TA/LOU button on the panel to activate
loudness function. LOUD will be displayed.
This is to increase the low frequency, which
can improve sensitivity for your ears. Keep
pressing it again to quit this function.
Mode selection
• In any mode, repeatedly press PWR/
SOURCE button on the RC or PWR/SRC
button on the unit to select a mode: Radio
=> GPS (not supported) => USB => SD =>
DVD => BT (not supported) => IPOD (not
supported) => TV => AUX.
• In any mode touch item on the screen to
display the source menu consisting of 2 pages.
In the menu, touch the item of the mode you
need to select the corresponding mode. To
switch between the 2 pages, touch the screen
on any non-functional area, then slide the page
aside (rightwards/leftwards).
The DVD, USB and SD modes are only
available when a disc, USB or SD/MMC card is
inserted into the unit.