ZELMER 28Z019 - Инструкция (Страница 84)

84 GW28-029_v02
3. Simply moving the iron, it will back on and the auto switch-off func-tion
shall be wyzerowana. You will hear a sound signal, the pilot light shall
go off, whereas the pilot light indicating heater in operation shall
glow (11) – the iron shall reheat again.
Attention: Each time usage – moving the iron shall bring it back to
the previous setting. The iron will take about 60 seconds to reach its
previous temperature setting.
Draining the water
Move the – Steam Control Knob (7) to
position.
Disconnect the iron from mains supply –
outlet.
Press the – Burst of Steam Button (9),
to release any trapped water when the
soleplate still hot.
Press the – Spray Buttons (10), to release
any trapped water.
Turn the iron upside down and gently shake –
it to remove the remaining water.
Before storage make sure that Steam
Control Knob (7) is in position.
Cleaning and maintenance
Disconnect the iron from mains supply outlet. –
The iron should get cool completely before cleaning. –
Use a damp cloth and gentle washing liquid for cleaning. –
Do not use aggressive detergents like cream, milk, paste etc. to –
clean the casing. They can remove graphic symbols such as: scales,
marking, caution signs, etc.
Never use sharp or rough objects to remove the deposits on the sole –
plate.
Never use any abrasive, vinegar or descaling agents to clean the iron. –
Ecology – Environment protection
Each user can protect the natural environment. It is neither
difficult nor expensive.
In order to do it: put the cardboard packing into recycling
paper container; put the polyethylene (PE) bags into
container for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appliance,
which can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any damages resulting
from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product any time in
order to adjust it to law regulations, norms, directives, or due to construction, trade,
aesthetic or other reasons, without notifying in advance.