Hyundai H-CDM8035RG - Инструкция (Страница 12)

12 13
Operation Operation
General operations
Turning on/off
Press any button on the RC or on the unit
(except REL and EJECT buttons) to switch
the unit on. The display will show a message
WELCOME to indicate it is ready to use. Press
and hold POWER button on the unit or
button on the RC to turn the unit off.
After the unit is off, volume level and
radio current settings will be memorized, and
when you turn the unit on it will resume the
stored status you set.
Mode selecting
Press MODE/ button to select between
unit operation modes: AUX => RADIO => DISC
=> USB => CARD.
USB, CARD, DISC modes will only
show on the display when a USB device,
memory card or a disc is inserted into the unit.
Volume control
The volume level can be adjusted at any
time by rotating VOLUME knob or pressing
/ buttons on the RC.
Mute function
Press MUTE/ button to cancel the
sound. Press it again or change the volume
level to resume the sound.
Audio parameter setting
Press repeatedly SEL/ button to select
bass, treble, balance or fader mode. The
corresponding word appears on the display.
Rotate VOLUME knob or press
/
buttons on the RC to adjust the selected
parameter. When DSP is on, treble and bass
control is not available. Balance is to adjust the
balance between the left and right speakers.
Fader is to adjust the balance between the rear
and front speakers.
In each mode, the waiting time is about
5 seconds, and the waiting time is over, it
returns to the last display mode of radio or disc
playback mode.
Beep
Press repeatedly SEL/ button to select
BEEP ON; rotate VOLUME knob or press /
buttons on the RC to toggle between BEEP
ON (beep sound will be heard when buttons are
pressed) and BEEP OFF, then leave the unit
idle for the new setting to take effect.
Equalizer modes
Press repeatedly SEL/ button to select
DSP. Rotate VOLUME knob or press /
buttons on the RC to choose an equalizer
effect: POP => ROCK => CLASS => FLAT
=> OFF. After you have reached the desired
effect, leave the unit idle in order for the new
setting to take effect.
Loudness
Press repeatedly SEL/ button to select
LOUD ON (LOUD OFF). Rotate VOLUME
knob or press / buttons on the RC to
select between LOUD ON/LOUD OFF. LOUD
function is to emphasize the bass output; the
word LOUD ON indicates that the LOUD mode
is on.
Color (option)
Press repeatedly SEL/ button to select
COLOR1 (COLOR2). Rotate VOLUME knob
or press / buttons on the RC to select
between COLOR1 (red panel backlight) or
COLOR2 (green color backlight).
Clock setting
The clock can be set anytime when the
power is on. Press three times button on
the RC or press PTY/CLK button on the unit,
then press and hold the button for 3 seconds;