Sony KDL-52 V4210 - Инструкция (Страница 175)

23 GB
Usin
g O
ption
al Eq
uipm
ent
Viewing Pictures from
Connected Equipment
Turn on the connected equipment, and perform
one of the following operations.
For equipment connected to the scart
sockets using a fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment
appears on the screen.
For an auto-tuned recorder
In analogue mode, press PROG +/– or the
number buttons, to select the video channel.
For other connected equipment
Press to display a list of connected
equipment. Press F/f to select the desired
input source, then press .
The highlighted item is automatically selected
if you do not perform any operation for two
seconds after pressing
F/f.
If you have set an input source to “Skip” in the
“AV Preset” menu (page 30), that input source
does not appear in the list.
z
• To return to normal TV mode, press DIGITAL or
ANALOG.
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
Connect an optional equipment (page 21), and
make sure that images from the equipment
appear on the screen (page 23).
~
• This function is not available for a PC input
source.
• You cannot change the size of the pictures.
• The analogue TV video in the TV programme
picture will not appear while displaying AV1, AV2
or AV3 in the external input picture. However, you
can hear the analogue video’s sound.
1 Press TOOLS.
2 Press F/f to select “PAP”, then press .
The picture from the connected equipment
is displayed on the left, and the TV
programme is displayed on the right.
3 Press the number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press or RETURN.
z
• The picture framed in green is audible. You can
switch the audible picture by pressing G/g.
To view two pictures simultaneously
– PIP (Picture in Picture)
You can view two pictures (PC input and TV
programme) on the screen simultaneously.
Connect a PC (page 21), and make sure that
images from the PC appear on the screen.
~
• “Power Management” (page 29) is not available in
PIP mode.
1
Press TOOLS.
2 Press F/f to select “PIP”, then press .
The picture from the connected PC is
displayed in full size, and the TV
programme is displayed in the small
screen.
You can use
F/f/G/g to change the
position of the TV programme screen.
3 Press the number buttons or PROG +/– to
select a TV channel.
To return to single picture mode
Press RETURN.
z
• You can switch the audible picture by selecting
“Audio Swap” from the Tools menu.