Siemens Gigaset USB Adapter 108 - Инструкция (Страница 13)

13 Gigaset USB Adapter 108
Gigaset USB Adapter 108 / deutsch / A31008-M1031-R101-2-Z143 / qig_usbadapter108.fm /
Sc
ha
bl
on
e
20
04
_1
2_
27
System requirements
You will require:
u a PC with at least 466 MHz and one of the following operating systems:
Windows 98SE, Windows ME, Windows 2000 or Windows XP
u 64 MB RAM and at least 30 MB free hard disk space
u a free USB port
u a CD-ROM drive or a DVD drive
Procedure for installation
To establish Internet access using Access Point, proceed as follows:
1. First install the Gigaset USB Adapter 108 in a PC.
2. Then install the Access Point. This is described in the operating instructions
for the device in question.
3. Then set up the connection from the Gigaset USB Adapter 108 to the Access
Point.
Installation of Gigaset USB Adapter 108 on a PC
Notes:
u Do not insert the USB cable plug into a spare USB port on your PC until the
installation software prompts you to do so.
u When installing the Gigaset USB Adapter 108 , the SSID (Service Set ID) of
all the wireless network components must be identical.
u You may require administrator rights for the installation process on your
PC.