Beko WKB 50831 PT - Инструкция (Страница 48)

EN 48
• Mini
This program is used to quickly wash
(30 minutes) a small amount of lightly
soiled cotton garments.
• Baby
Increased hygiene is provided by a
longer heating period and an additional
rinse cycle. It is recommended for baby
clothes and clothes worn by allergic
people.
• Hand Wash
You can wash your woolen/delicate
clothes that bear “not machine-
washable” labels for which hand wash
is recommended on this program. It
washes the laundry with very tender
washing movements without damaging
your clothes.
Each of these main programs comprise
of a complete washing process,
including washing, rinsing and, if
required, spin cycles.
C Sort the laundry according to type
of fabric, color, degree of soiling and
permissible water temperature when
choosing a program.
C Always select the lowest required
temperature. Higher temperature
means higher power consumption.
C For further program details, see,
“Program Selection Table”
Special programs
For specific applications, you can select
any of the following programs:
• Rinse
This program is used when you want to
rinse or starch separately.
• Spin and drain
This program is used to apply an
additional spin cycle for the laundry or to
drain the water in the machine.
Before starting this program, select the
desired spin sped and press “Start/
Pause/Cancel” button. Your machine
drains the water after spinning at the set
spin speed.
If you only want to drain the water
without spinning your laundry, select
“Spin and Pump” program, and then
select no spin function with spin speed
selection button. Press “Start/Pause/
Cancel” button.
A You should use a lower spin speed
for delicate laundries.
Spin speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To decrease the spin speed, press the
“Spin” button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “ ” and no
spin is shown with “ ” symbols.
If you do not want to unload your
clothes immediately after program, you
may use rinse hold function in order to
prevent your clothes become wrinkled in
anhydrous conditions. With this function,
your laundry is kept in the final rinsing
water. If you want to spin your laundry
that you left in water:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Program resumes. Your machines drains
the water and spins your laundry.
You can use no spin function in order to
drain the water without spinning at the
end of the program.