Hyundai H-CDM8037 - Инструкция (Страница 12)

12
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press OPEN button on the panel to open the panel and press the RESET button with thin hard object to restore the unit to the original
factory settings.
Power button
Press any button to turn the unit on. Press the PWR button shortly to turn off the unit but the electronic clock.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it will resume
the stored status which you set.
Volume control
Rotate VOL knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level.
Setting the sound characteristics
Press SEL button repeatedly to select the audio modes: BASS => TREBLE => BALANCE L-R => FADER R-F.
Rotate VOL knob to adjust each mode.
Setting other characteristics
Press and hold for 2 seconds the SEL button to select the modes: TA SEEK => MASK DPI => RETUNE => AUDIO DSP =>
LOUDNESS => ESP => CD MULTI => BEEP => SEEK => STEREO => LOCAL.
The display will show the following picture: