Русский, English – Инструкция по эксплуатации Vitek VT-3632

Страница 4

Advertising
background image

13

7.8.9.10.11.12. ПРЕДУСТАНОВЛЕННЫЕ РАДИОСТАНЦИИ [М1 М6]
Шестью пронумерованными кнопками предварительной установки можно заносить в память и
вызывать из памяти радиостанции в любом диапазоне.

Занесение станции в память:
1. Выберите диапазон (при необходимости).
2. Выберите радиостанцию.
3. Удерживайте кнопку с номером более одной секунды. Как только радиостанция занесена в
память, ее номер высветится на дисплее.

Вызов станций из памяти:
1. Выберите диапазон (при необходимости).
2. Для того чтобы вызвать из памяти радиостанцию, удерживайте кнопку с номером менее одной
секунды.

13. КНОПКА ОТКЛЮЧЕНИЯ ЗВУКА (MUTE)
Для отключения звука, нажмите на кнопку (MUTE). Звук будет отключен полностью. Для того
чтобы восстановить прежнее звучание, еще раз нажмите эту кнопку.

14. ВЫБОР РЕЖИМА СТЕРЕО / МОНО (ST)
В режиме СТЕРЕО принимаются радиостанции только в диапазоне FM. Используйте режим
МОНО, если при приеме радиостанций в диапазоне FM звук сопровождается шумовыми
помехами или шипением. Для возврата к стереофоническому воспроизведению звука, нажмите
кнопку (ST) повторно.

15. ЭЛЕКТРОННЫЙ ЭКВАЛАЙЗЕР (EQ)
Нажатием кнопки (EQ) выбирается один из следующих режимов работы электронного
эквалайзера: ОБЫЧНЫЙ (FLAT), КЛАССИЧЕСКИЙ (CLASSICS), РОК (ROCK), ПОП (POP).

16. НАСТРОЙКА С АВТОПОИСКОМ (AMS)
Кратковременного нажатия этой кнопки достаточно для того, чтобы радиоприемник начал поиск
предустановленных радиостанций. Поиск предустановленных станций может сопровождаться
достаточно высоким уровнем шума, при этом каждая найденная станция будет воспроизводиться
в течение 5 и секунд.
Если Вы нажмете и удерживаете эту кнопку более 1 й секунды, то 6 самых сильных по мощности
радиостанций будут занесены в память под соответствующими номерами предварительной
установки.
Как только автопоиск завершен, радиоприемник начнет работать с установленными
радиостанциями.

17. ДИАПАЗОН (BAND)
Нажмите кнопку (BAND) для выбора желаемого диапазона частот. Выбор диапазона будет
осуществляться в следующей последовательности:

18. ВКЛЮЧЕНИЕ / ВЫКЛЮЧЕНИЕ ПИТАНИЯ (PWR)
Нажатием кнопки (PWR), Вы можете включить или выключить питание автомагнитолы.

19. КНОПКА ВЫБРОСА КАССЕТЫ
Нажмите на эту кнопку для выброса кассеты.

РУССКИЙ

6. MODE BUTTON
Press it repeatedly to select CASSETTE and RADIO mode in sequence and circulation.

7.8.9.10.11.12. PRESETMEMORY [1 6]
Twenty four stations (18FM, 6MW) can be stored into the six preset memory buttons. To recall any sta
tion in the preset buttons, firstly select the proper mode of band. Then press the desired preset button, 1
through 6 digits on the display will indicate mode of the band and station channel, to which the radio is
tuned. To store the station into the preset buttons.
MANUAL MEMORY BUTTON
Select the band required to be memorized (FM1, FM2, FM3, MW1) by pressing the BAND selector.
Tune in the station to be memorized using SEEK or MANUAL tuning for memorization of the station into
one of the preset memory button, press desired preset button for at least two seconds, while the audio
output is muted. When the sound returns, the station has been properly memorized into the preset but
ton. Up to 18FM stations (6 each for FM1, FM2 and FM3), and 6MW station (6 stations each for MW1) sta
tions can be assigned to the 6 preset memory button.

13. MUTE BUTTON
Press it to eliminate the sound immediately.

14. ST BUTTON
Press ST button to stereo reception for radio stations.

15. EQ BUTTON
Press it to switch between 4 preset equalizer curves: FLAT, CLASSIC, ROCK, POP. The sound quality will
be changed.

16. AMS BUTTON (Automatic Memory System)
In Radio mode, press AMS button hold for more than 2 seconds can auto store radio stations.

17. BAND BUTTON
Press it to select the band and the LCD screen will be shown as below:

18. POWER BUTTON
Press it to turn on or off the unit.

19. EJECT
Push down to eject the cassette tape.

20. CASSETTE COMPARTMENT
Insert cassette tape into the cassette compartment. The cassette mechanism will load it in play mode.

21. PROGRAM BUTTON
These 2 buttons perform the dual functions of changing the direction of tape playback and fast for
ward/rewind of the tape.
Change Tape Playback Direction Press both buttons together to play the other side of a tape.
Fast Forward/Rewind Press the button with the double arrows pointing the same direction as the direc
tion indicator in the LCD to fast forward, press other button in the opposite direction to fast rewind.
Note: Do not directly change each other forward and rewind. Press both the fast forward and rewind but
tons together to play mode first, and then change to the other mode as below:

4

ENGLISH

FM1

FM2

FM3

AM1

AM2

FM1

FM2

FM3

AM1

AM2

3632.qxd 16.03.04 11:56 Page 6

Advertising