Using the rotary commander – Инструкция по эксплуатации Sony XR-4950X
Страница 12
12
By pushing in and rotating the
control (the PRESET control)
Push in and rotate the control to:
Receive the stations memorised on the
number buttons.
Other operations
Note
When installing in a car without ACC (accessory)
position on the ignition key switch, press (OFF) for
two seconds to turn off the clock display after
turning off the engine.
OFF
Rotate the VOL control to
adjust the volume.
Press (ATT) to
attenuate the
sound.
Press (OFF) to turn
off the unit.
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
(the SOURCE and MODE buttons)
Each time you press (SOURCE), the
source changes as follows:
TUNER t TAPE
Pressing (MODE) changes the operation
in the following ways:
•
Tuner : FM1 t FM2 t FM3 t AM1
t AM2
• Tape : playback direction
By rotating the control
(the SEEK/AMS control)
Rotate the control and release it to:
•Locate the beginnings of tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To start
playback while fast-winding the tape,
press (MODE).
•Tune in stations automatically. Rotate and
hold the control to find a specific station.
(SOURCE)
(MODE)