Saturn ST-HT7273 - Инструкция (Страница 3)

4
2. Options of common type and
remote control type.
3. Display panel of digital screen,
infrared remote control, easy and
simple. (Remote type)
4. Silent warmth: quiet and cozy.
5. Multiple safety device: Auto
power-off protection during
overheating.
6. Thermal sensor design: easy for
you to set room temperature that you
are satisfied with. (Remote control
series)
7. 24-hour switch on and off: easy,
safe, reliable. (Remote control series)
8. Display of automatic
determination of ambient
temperature. (remote control series)
9. Portable wall-mounted structure:
easy for you to install according to
actual needs.
10. Operation function of touch
switch. (Remote type)
11. Noble, elegant and beautiful
special white crystal glass panel.
Safety Instructions
 Open the package, take out the
body, check whether the supplied
accessories and the body are complete
and intact.
 Power on (put the plug into
electrical outlet) after the equipment
is installed in place according to
installation instructions and
requirements.
 Read the service manual before
you use the electric heater. Keep the
manual and have it attached with the
heater in case you offer the heater to
others as a gift.
 The heater is only suitable for
indoor use. Do not use it outdoors!
 The heater can not be directly
used in tub, shower room or near pool
 Do not leave the heater
unattended during use. Keep the
heater out of the reach of children. Do
not use automatic switch device on
the heater (for example, time switch),
otherwise automatic operation of the
electric heater which is left unattended
may be caused.
 Covering of the heater is strictly
prohibited. Maintain a sufficient safe
distance from inflammables and
explosives to avoid risks of fires and
explosions.
 Inserting other items into the
shell or protection grid of the electric
heater is strictly prohibited, or electric
leakage and shock may be caused.
 Do not touch the metal housing
as it will get hot during the running of
the electric heater, and keep the
heater away from children to avoid
risk of burns. Turn it off and set aside
some time to let the heater cool
before you store it.
 If the electric heater has been
idle for a long time, plug the power
plug from the outlet.
 Prior to the use of the electric
heater, make sure that the heater is in
a good condition and intact. In case
the heater shell, wire or plug is
damaged, the heater may not be
connected to power
 The heating unit of the heater
(the tube at the back of the heater)
may be damaged from fall. Please
confirm the heating unit is not
damaged prior to each use. Do not
use the electric heater if the heating
element is broken.
 Disconnect the power plug when
moving or cleaning this appliance.
When disconnecting the appliance
connection, first turn off the switch,
then unplug the plug. Do not yank the
power cable.
 Demolition of the electric heater
with authorization is strictly
prohibited. Please look for professional
service personnel if the heater is
damaged.
 Installation of the heater directly
under wall outlet is strictly forbidden.
 During normal use, do not let
bare skin touch the surface of the
appliance, so as not to be burnt
 Avoid the use of the heater if
children, animals or the disabled and
those who lack self control are present
while nobody else is taking care of
them.
 The appliance should not be
available to the following people
(including children): those with
physical, sensory or mental
impairments, or those who lack
experience and knowledge unless they
get custody or instructions on the use
of the product from the person who is
responsible for their safety.
 Children should be supervised
and ensured that they will not play
with this appliance.
 Only specific personnel from the
technical service center may replace
the power cord of the product in case
it is damaged to ensure safety.
 Do not share the socket with
other electrical appliances to avoid
current overload, or fire risks may be
caused by excessive load
 CAUTION: covering of the
cooling device is prohibited to avoid
overheating, or dangerous accidents
may be caused.
Installation and application of
5
electric heater
 Check whether the parts are
complete and the product is intact
when open the package.
 Make sure the heater is correctly
fixed with the screws provided. Please
make sure the base is level, stable
and clean. Please note the safe
distance mentioned below.
Steps for castor installation:
1. Put the product upside down on a
soft cotton cloth or carpet.
2. Mount the stand in the
corresponding location of the lower
part of the product as shown above,
and then fix the randomly supplied
screw at the bottom of the product
with a screwdriver and tighten the
screw.
Wall-mount Instructions
1. Take out the wall brackets and
expansion screws out from the box,
and fix the screws onto the wall
according to the distances between
holes of the wall brackets, as depicted
in the picture below.
2. Aim the 4 holes in the back of the
machine to the 4 hooks on the wall
bracket and push it on, and then slide
into the slot to click on, as shown
below.
3. Fix the wall bracket lock piece
onto the bracket with screws, slide the
lock piece into the locking slot on the
back of the machine, and then tighten
up the screw, as shown in the picture
below.