Saturn ST-VC0262 - Инструкция (Страница 4)

6
ance.
Floor brush
You will probably work most frequently
with the floor brush. This is suitable for
cleaning wide areas. The floor brush is
fitted with a practical 360 0 joint. This
ensures that you can reach easily into
any corner.
Clean carpets and wall-to-wall carpets
without using the brush. Press the tip
switch marked with the carpet symbol
and the brush is raised.
Smooth floors such as PVC, parquet or
tiles are best cleaned and cared for su-
ing the brush. To do so press the tip
switch with the symbol for smooth floors
and the brush will come out.
Round brush
The round brush head can be 360 de-
gree rotated, convenient for use. You
can use this to clean the dust from
books or sensitive objects such as pic-
ture frames etc.
This brush is suitable for the careful
cleaning of upholstered furniture, mat-
tresses, cushions, curtains etc.
2 in 1 nozzle
This nozzle is two in one design and can
be used in two ways.
It is suitable for
sucking clean the folds in cloth, joint
cracks and corners or niches that cannot
be reached with the floor nozzle.
Cleaning brush
There is a cleaning brush with the appli-
ance which fixed on the bottom base.
We recommend to clear the dust on
the surface of HEPA filter away with this
cleaning brush. As this can reduce the
damage of the HEPA filter, prolong the
life of HEPA filter.
PREVENTION
Switch off the vacuum cleaner immedi-
ately if the air intakes, the floor brushes
or the telescopes tube becomes blocked.
Before starting the vacuum cleaner up
again remove the substance causing the
blockage:
Never use the vacuum cleaner in the
immediate vicinity of hot bodies and do
not suck up hot objects such as ciga-
rette ends or ashes.
Only place the plug in the socket when
your hands
are dry.
Please remove large of sharp objects
from the floor before using the vacuum
cleaner to avoid any possible damage to
it.
7
Do not pull
by the mains cable when pulling out the
plug.
Danger!
The vacuum cleaner is
provided with a plug and an electric
cable. If the plug or the cable are dam-
aged a qualified electrician must be
called to repair them.
ASSEMBLING THE VACUUM
CLEANER
Caution!
Before assembling or disassembling the
accessories always ensure that it has
been unplugged from the mains socket!
Connecting your vacuum cleaner
Assembly and disassembly of the tube
§ Montage:
Insert the tube in the air intake open-
ing.
Push the tube in until it locks in place
§ Disassembly:
Take the tube from the air intake after
disconnecting from the mains socket.
2. Assembling the telescopic tube and
accessories
2.1. Remove the telescopic tube from
the hand grip.
§ Set the telescopic tube to the correct
length.
§ Push the telescope tube slide forwards
and pull out the lower part of the tube
to the extension length required.
§ Then simply let go of the slide and let
it snap into place
2.3: Fix the floor brush to the telescopic
tube.
2.4 Suitable for everyday cleaning of the
carpet and of wooden floors.