Saturn ST-FP7099 - Инструкция (Страница 4)

6
◆ Using methods/operating
methods
1. Place the meat grinder on a dry and
horizontal surface. Connect the power
supply and turn on the push button.
The prepared food put into feeder
tray. Please use food pusher slowly
pushing food
2. After the use please cut off the
power supply.
Instruction for use of
slicer/shredder
Name of Parts
◆ Operating the shredder
Recline the catch and put one of the
drums with the clutch facing the
middle of the chamber.
Snap the catch.
Assemble the chamber of the shredder
just as like mincing chamber.
Cut large products into smaller
elements, which you can easily put
into the mincing chamber.
Do not mash soft fruits containing
stones.
When the work is finished, pull the
power cord out from the network
supply socket.
Remove the food remaining in the
shredder chamber or on the grater
with a wooden spoon.
Blades of the drums do not require
any regeneration.
7
Tomato juicer using
Name of parts
Operating the tomato ketchup:
1. Chop in tomatoes firstly.
2. Put the tomatoes loaf on the tray
3. Turn on the power switch and make
sure the equipment moves all right
before put the food into the tray, and
use food pusher to stress
Warning： While operating, if the
food stuck the screw, disconnect
the power quickly.
Electric circuit diagram
Cleaning and maintenance
Note: the appliance is easier to clean
if you do so immediately after use.
* If there is food gets stuck,
immediately shut off the power
supply, startup reversal function of the
appliance and take out the stucked
food, then the appliance can be used
again.
* Don't use this machine or cleaning,
please pull power plugs.
* Do not use abrasive cleaning agents,
scourers, acetone, alcohol etc. to
clean the appliance.
* Part equipment is sharp, remove
instruments utensils carefully when
cleaning, please use the brush to
clean, in order to avoid scratches the
finger.
* Never immerse the motor unit in
water nor rinse it under the tap.
* Avoid any bumping of the appliance,
otherwise it will be deformed or
broken.
* After usage, please clean the
appliance and wipe the parts with a
dry cloth and store it in dry and windy
place.
* Wash the metal parts in hot water,
with addition of the dishwashing
liquid.