Saturn ST-FP9087 - Инструкция (Страница 2)

3
GB
BLENDER
Dear Buyer!
We congratulate you on having
bought the device under trade name
“Saturn”. We are sure that our devic-
es will become faithful and reliable
assistance in your housekeeping.
Avoid extreme temperature changes.
Rapid temperature change (e.g. when
the unit is moved from freezing tem-
perature to a warm room) may cause
condensation inside the unit and a
malfunction when it is switched on.
In this case leave the unit at room
temperature for at least 1.5 hours
before switching it on.If the unit has
been in transit, leave it indoors for at
least 1.5 hours before starting opera-
tion.
Read all instructions carefully before
using the appliance
General description
1. Graduated measuring cup
2. Lid
3. Blander jar with level indication
4. Sealing ring
5. Blade unit
6. Blade unit interface
7. Motor unit
8. Control knob
Important notes
Read this user manual carefully before you
use the appliance and save it for future ref-
erence.
Caution
Never immerse the motor unit in water or
any other liquid, nor rinse it under the tap.
Use only a moist cloth to clean the motor
unit.
Warning
§ Check if the voltage indicated on
the appliance corresponds to the local
mains voltage before you connect the appli-
ance.
§ Do not use the appliance if the
plug, the mains cord or other parts are
damaged.
§ Do not lift the appliance by the
handle of the blender jar, when the blender
jar is fixed to the motor unit. The motor
unit may fall to the floor and get damaged.
§ Never let the appliance run unat-
tended.
§ This appliance is not intended for
use by persons (including children) with
reduced physical, sensory or metal capabili-
ties or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
§ Children should be supervised to
ensure that they do not play with the appli-
ance.
§ Do not touch the blades, especially
when the appliances is plugged in the
blades are very sharp.
§ Never reach into the blender jar
with your fingers or an object while the
appliance id running.
§ Make sure the blade unit is secure-
ly fastened to the blender jar before you
assemble the blender jar onto the motor
unit.
§ Do not touch the cutting edges of
the blender blade unit when you clean it.
They are very sharp and you could easily
cut your fingers on them.
§ If the blades get stuck, unplug the
appliance before you remove the ingredi-
ents that block the blades.
Caution
§ Always unplug the appliance before
you assemble, disassemble or make ad-
justments to any of the parts.
§ To prevent failure of the appliance,
make sure that no food or liquid enters the
connection point of the blender jar on the
motor unit.
§ Do not exceed the maximum level
indicated on the accessories.
§ Never fill the blender jar with in-
gredients hotter than 80 0 С.
§ To prevent spillage, do not put
more than 1.0L of liquid in the blender jar,
especially when you process at a high
speed. Do not put more than 0.8L in the
blender jar when you process hot liquids or
ingredients that tend to foam.
2