Important, Cleaning and maintenance of the unit, Troubleshooting – Инструкция по эксплуатации TIMBERK THU UL 04
Страница 16
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
then remove the filter also by turning it counterclockwise. The new filter is
installed in the reverse order. To purchase an ion exchange filter, please,
contact the seller.
Important!
Useful capacity of an ion exchange filter is about 400 liters. Continuous
use after expiration reduces the capability to filter hard components
(calcium and magnesium) of tap water. As a result, the level of white
residue formation increases.
Standard filter replacement period is about 180 days given the
automatic operation mode (duration of humidification with heating -
about 6 hours every day). Filter replacement period can be decreased
depending on different frequency of operation and water quality. Pay
attention to the formation of a white powder.
8. Cleaning and maintenance of the unit
Prior to cleaning make sure that the plug is disconnected from an outlet.
Otherwise it may result in an electric shock.
Before cleaning, wait until water in grooves is completely cooled down In
order not to burn hands.
8.1 To wipe the external surface of the unit use a damp and soft cloth.
To prevent an electric shock do not scratch and do not damage unit's
elements upon cleaning.
When cleaning the unit, do not use solvents, benzine, dimethylbenzene, hard
brush, talc powder and other substances other than water.
8.2 Wipe water remains inside the groove under the tank by a damp and soft
cloth.
To remove water remains on small parts you can use the brush, and then wipe
them again with a soft cloth. Clean the unit once or twice a week.
8.3 If there is dirt on the membrane, clean it by means of a brush. Clean the
unit once or twice a week.
8.4 Use a brush to remove water remains on the surface of the nozzle
and then wipe it again by a soft cloth. Clean the unit once or twice a
week.
8.5 Clean the water tank and the atomizer by pure water. Clean the cap
carefully, without applying much effort, otherwise it may result In water
leakage through the cap.
Once water remains are removed from the surface of the atomizer, wipe It by a
soft cloth.
Clean the external surface of the unit by a damp and soft cloth.
9.Troubleshooting
In case of emergencies resort to troubleshooting methods, given in tables.
If you are unable to solve issues by means of mentioned methods, contact
a service center.Life of the humidifier is 5 years.
Upon expiration of the humidifier it must be disposed in accordance with
regulations, rulesand by means, currently in force at a disposal station.
Tables.
= Deflect
Possible cause
Remedy
Poor atomizing
(insufficient
performance)
The unit is operating in
a light mode (low
atomizing frequency)
No defect If necessary to switch to the intensive
mode, press "Atomizing frequency" button in
the manual setting mode and switch the unit
to the intensive operation mode.
Atomizer is cloaoed
Clean the atomizer
Tank water temperature
is too low
Set the maximum performance. Humidifier's
oerformance will be increased in 10 minutes
No atomizing
The plug is poorly
inserteo into an outlet
Connect the plug into an outlet carefully
Red light on the water
indkaitor has illuminated
and went out (water
tank is completely empt^
Add water to the tank
A white residue appeared
on objects arouncf the
humidifier (salts,
separating from water)
Lime deposits are formed
on the membrane
dean the humidfier^ membrane by a spedal brush
Water demineralization
cartridge is worn down
(ion exchange resin)
Replace the cartridge
No warm atomizing
Use of warm steam is
not selected
Press "warm steam" button in the manual setting
mode and switch the unit to a warm steam
humidification rTKxle
Operation has just started
No defect. It will take about 10-20 minutes
for warm steam to be atomized (time, required
for water heating by the heater after
it's switched on)
Difference between the
level of current humidity
and readings of a
humidity recorder
is too big
Dirt accumulation
inside an air vent
Clean the air vent Even in one room humidity
can be different deoendina on the location
The unit IS operated
k\
places wheie it is affected
by the environment^
for eomple by a window
Install the unit in places, where it cannot be
affected by the environment
Steam has an
unpleasant odor
Not fresh water in use Clean the unit in accordance with the cleaning
and maintenance manual and fill it with fresh
water
There are remains of
not fresh water or litter
in the water groove
Signari"is given
Tankfull sound signal
No defect in the unit keep on its operation
Signal "2” is given
Fan operation
sound signal