Beko CE 51110 - Инструкция (Страница 42)

4.^ Operating the hot plates
Carras/tOMUng Caakhtg Vaiaas
Hotplate control position j 2 1 3 4 1 S 1 Ó
Applicaffon Warming Simmering Cooking-Frying-Boiling
A
rapid fie
off fig
hotplate is denoted by a red spot
in the centre of the hofp/afe:
Hotplate operating knobs
The knobs for the hob can be rotated in either
direction to provide fully variable heat control.
When any one of the hotplates is on, the red
indicator light on the control panel will be on.
In order to sw;7cfi ffie hotplate OFF turn the
corresponding knob to the 0 (zero) position. Knobs
of the hotplates can be turned both clockwise and
counter-clockwise directions.
Check fhaf all fke cooker €ontrols have
been swffched eif offer use.
Adjust the hotplates to mid position (3) and leave
on for approximately 8 minutes in order to burn
off the protecfiVe coating on the hotplates. Do not
place any pans or other cooking utensil on the
hotplates during this process. Fumes will be emitted
during the above operation but this is quite normal.
Good Quality Pans
e- Use only good quality pans having a stable boftom os sfiovvii below. This
results in the maximum use of energy.
Right Puu
(Correa tizo)
(Too smati)
!*■
I
«■ Use pans for the correct diomefer
only. If the pan is too small energy is
Wosted.
»• Do not place pans with wef boses
or pan lids parficulary wet lids on the
hotplates damage could occur and
safety problem will be experienced.
Hotplate dicrmeter Suggested diameter
ffn'r’J of the pan (mm)
0 145 mm (Small) ------ *~150-170
0 180 mm (Large) ------------ ►; 80-200
[m- Drying the hotplates (max 5 min).
Wfien cool;
w Cfeon off solid hotplates with a damp cloth and a little domestic cleaning
creom. After cleaning, dry solid hotplates by switching on for a short time. Apply
a thin coat of cooking oil from to time.
When wiping the hotplates with a damp cloth follow the circular grooved
pattern on the hotplate.
8