Beko CS 47100 - Инструкция (Страница 26)

Part 8: Maintenance and cleaning
Turn off the mains switch
before cleaning
Before switching on again ensure
that all controls are in the OFF position.
Make sure that the oven, grill
before you start cleaning.
Your product is manufactured in
a manner that it should not overflow
the oily food juices under the counter.
The pan supports can easily be
removed and the top burner plate can
be cleaned with soapy water, and
rinsed with a dry cloth.
Wash and rinse the gas burner
caps and the pan supports with soapy
water. Never wash the gas
burner caps and the pan
supports in the dishwasher.
For
the dirts and stains on the burner
heads that can not be cleaned, use
the metal surface cleaners you can
obtain from the market according to
their instructions.
It is recommended that the acidic
matters such as oil, lemon etc. should
be cleaned immediately.
cap
head
Use a damp cloth to clean the
interior and exterior. Never use
any sharp instruments, abrasive
household cleaner, or detergents
for cleaning. For hard stains use
suitable washing liquid.
Ensure that the door seal is
dry after cleaning. We
recommend that grill elements
be wiped with a damp cloth to
remove any fat splashes. This will
prevent fumes for any fat being
burned off when the cooker is
next used.
Solid hotplates
The cleaning of solid hotplates
should be done when they are
cold, using non scratch cream
following the grain of the
hotplate. Wipe over with a
damp clean cloth, making sure
that all the cleaner has been
removed. Finally, turn on the
hotplate to warm for a few
minutes, then smear with a little
cooking oil to provide a
protective cooling.
Vitreous enamel hob
surround
Clean with a cloth wrung out in
soapy water. Stubborn stains can
be removed with a cream, paste
or liquid cleaner. Check that the
cleaning agent used is approved
by the Vitreous Enamel
Development Council.
«•“ Never clean the cooker surface
by using materials such as hurd
brushes, steel pads or knives,
which can easily scratch the
enamelled and stainless steel
surfaces.
^ Special cleaners that are
commercially avaible may be used
after carefully reading the
warning labels written on them.
Do not use cleaning agents
containing acid or chlorine.
Cleaning can be accomplished
using a soft piece of cloth wetted
with soapy water or with
commercially available special
surface cleaners and a soft piece
of cloth. Especially use liquid
paste or cream type cleaners.
25