Vitek VT-3788 - Инструкция (Страница 8)

4. Skip to the previous
program/track
1) Press this key during playback
to skip to the previous
program/track.
2. Press this key in the Zoom-in
mode to change the zooming
level.
5. Fast forward the track /move
the image to the right
1) When viewing a VCD disc,
press this button to select one of
the four speeds of forward
searching for required disc frag-
ment. Press the PLAY key to
resume playback.
2) Press this key in the Zoom
mode to move the image to the
right.
6. Rewind the track/ move the
image to the left
1) When viewing a VCD disc,
press this button to select one of
the four speeds of backward
searching for required disc frag-
ment. Press the PLAY key to
resume playback.
2) Press this key in the Zoom
mode to move the image to the
left.
7. Volume up
Press this key to increase the vol-
ume.
8. Volume down
Press this key to decrease the
volume.
9. Numeric keys
1) Using these keys you may
select the required track.
2) When playing a MP3 disc: if
you want to play, say, track No.
103, press keys 1, 0 and 3 on the
wireless remote control, then
press PLAY to start playing the
selected track.
10. Audio channel switch
When viewing a VCD disc, press
this key to select one of the two
reproducing channels: left chan-
nel/ right channel/ stereo sound.
11. Video system switch
When viewing a VCD disc, press
this key to switch between the
video output systems
(PAL/NTSC).
12. Playback from selected time
When viewing a VCD disc, press
this key and enter four digits, for
instance, 58:56. Your VCD disc
will be played since the selected
moment (in this case, after 58
min. 56 sec. of the total playback
time).
13.Playback interruption memo-
ry/ ESP function
1) Press the STOP key in the
playback mode to stop playback.
If you press this key again without
opening the disc compartment
door, playback will resume since
the moment it was stopped.
2) When reproducing VCD/CD
discs, press this button to acti-
ENGLISH
7
Vt-3788.qxd 08.02.2005 10:26 Page 7