Vitek VT-3788 - Инструкция (Страница 12)

Note: to ensure complete recharge
never press the STOP key.
2) Full recharge of 1200 mA/h
batteries takes 10 hours.
When recharging the batteries of
different capacitance, select the
required recharge time using the
Skip to the previous/next track
keys.
3) In the process of recharge the
unit will be slightly heated - this is
normal.
4) Never attempt to recharge fully
charged batteries - this will
reduce their lifetime.
5) The symbol
flashing on
the LCD means that the batteries
are low and need recharging.
6) Never use the batteries without
insulated housing - this may
cause short circuit and damage
the player.
7) Always use the batteries of the
same type and age.
8) Do not forget to remove the
batteries if the unit is supplied
from another power source.
9) Never attempt to recharge
common dry batteries. This may
cause explosion and battery leak-
age.
10) Never use low-quality discs
or batteries - this may reduce the
service life of the player.
UNIT AND DISC
MAINTENANCE
1. Unit maintenance
1) Read this instruction manual
carefully before using the unit for
the first time - improper operation
may cause malfunctioning or
damage the player.
2) Never touch the laser lens and
make sure it never touches any
hard objects.
3) Never put heavy objects on the
unit, this may cause damage.
4) Do not expose the unit to a
continuous shaking or blows -
this may reduce the service life of
the reading mechanism.
5) If there are any sound distor-
tions while reproducing high-
quality discs, use special discs to
clean the laser lens.
6) Frequent reproduction of two-
in-one discs may also reduce the
service life of the laser head.
7) Do not use low-quality or
deformed discs - this may cause
damage to the laser lens.
8) Never try to reproduce dirty
discs.
2. Disc maintenance:
1) Keep the disc clean. Hold it by
the edge and by the internal
opening.
2) Never stick any paper or adhe-
sive type on the disc surface.
3) Do not expose the disc to
ENGLISH
11
Vt-3788.qxd 08.02.2005 10:26 Page 11