Flylink Full HD H.264 WIFI - Инструкция (Страница 19)

- 19 -
Mode Switching
When the camera is switched on, the default mode is 1,080@30
frames/s and the LED indicator is in green. To switch modes,
press the Mode key once. Press the Power/Mode key to circulate
modes in the following order: 720P60, Photo, G-sensor mode,
Back and 1080P30.
1080p@30fps Mode - Green LED
When the camera is switched on, the default mode is 1080@30
fames/s. In the preview mode, press the Shutter button once
again, the camera will start to take videos. In the process of
videoing, the green LED indicator will flicker; press the Shutter
button again to stop, then the green LED indicator will keep in
solid green.
720P@60fps Mode - Blue LED
Press the Shutter button once. In the preview mode, the camera
will start to take videos. In the process of videoing, the blue LED
indicator will flicker; press the Shutter button again to stop, then
the blue LED indicator will keep in solid green.
Photo Mode - Red LED
In 1080P30 mode, press the MODE key to switch to Photo mode;
press the Shutter button to take photos with the red LED in solid
green. When the camera is in the standby mode, to take single
photo, press the Shutter button, then you will hear the sound from
the buzzer and see the red LED indicator flickers once, and thus
one photo has been taken.
G-sensor mode - Green LED and circular video
In 1080P30fps mode, press the MODE key to switch to G-sensor
mode. In such case, G-sensor will not be inactivated until vehicle
collision occurs, and the current video segment will not be