Инструкция по эксплуатации Flylink Full HD H.264 WIFI

Страница 16

Advertising
background image

- 16 -

Notice before use:
1.

Make sure the Micro SD card of this device has been

installed properly. This device needs the 4-32GB card with speed
at and above CLASS 4.
2.

Make sure the storage card has sufficient space.

3.

Always use the original charger and data cable to avoid

damaging the device.
4.

If the camera is always in the idle state for 3 minutes, it will

automatically switch off.

*Waterproof Housing Features

1,The performance of the waterproof housing is equal to IPX8
(60m/1hr).

2,Limitation of underwater duration: Do not use the waterproof
housing underwater above 60min and more than 60m in depth to
ensure effective water resistance.

3,When this device is used in cold or wet environment or in water,
always place an anti-fog insert together with the camera into the
waterproof housing to avoid fogging. The anti-fog insert provides
only the protection to some extent and the actual effect depends
on the specific environment. The anti-fog insert must not be used
for long but replaced regularly.

4,After the waterproof housing is used and the camera is taken
out of the waterproof housing, soak the waterproof housing into
clear water for about 10min. 10 minutes later, wipe the housing
dry with lint-free cloth. Place the waterproof housing in a cool
place with good ventilation to let it dry in air naturally.
5,The waterproof grade of the watch is 10m; do not use it more t
han 10m under water to ensure water resistance.

Advertising