Petsafe Petporte Smart Flap® Microchip Cat Flap - Инструкция (Страница 114)

FI
DA
SV
RU
NO
EN
114 www.petsafe.net
Extended Modes - Quick Guide
Please see page 116 for a full explanation of each Extended Mode.
Press and hold both the Red and Green Buttons simultaneously for more than 2 seconds and then release to enter the Extended Mode menu.
When in Extended Modes, the green light illuminates and you start in Exit Mode. Modes are selected by pressing the Red Button to go “up” a mode and the
Green Button to go “down” a mode. The current mode is indicated by a number of beeps. When you are in the mode you require a quick press of both buttons
simultaneously will activate that mode.
No. of Beeps Mode Function
1 Exit Mode Cancels the extended mode option system and returns the Petporte smart flap ® to a normal mode of
operation.
2 Open Mode The green light will flash and the green lock will lower allowing any cat access through the Petporte
smart flap
® .
3 Silent Mode The audible beep will no longer sound when your cat is recognised by the Petporte smart flap ® .
4 Set Light Level Mode Sets the desired light level for which the cat flap will lock and unlock during Night Mode operation.
5 Lock Return Time The default time for your Petporte smart flap ® ’s locks to return to their locked positions after your cat’s
microchip has been recognised is 4 seconds. However, should you have a particularly timid cat, or if
your cat is frequently chased by other cats, the lock return time can be lengthened or shortened.
6 Low Battery Lock State If, when the Petporte smart flap ® is running in battery mode, the battery charge runs low, the Petporte
smart flap ® has a built in option to allow the locks to be set at a specified open or closed position.
7 Timer Mode Sets the specific times of day for which the cat flap will lock and unlock during Night Mode operation.
Night Mode - Currently Night Mode is unavailable when the unit enters battery backup mode.