How to use, Connecting the flexible hose, Assembling the tubes – Инструкция по эксплуатации LG V-C3048ND
Страница 21: Using the cleaning head and accessory nozzles, How to plug in and use, Adjusting the power ievei, Carrying and storage, Changing the dust bag
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
How to Use
Connecting the flexible hose
Push the end of the head (1) on the flexible
hose (2) into the attachment point on the
vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press on the button (3) situated on
the head, then pull upwards.
Assembling the tubes
(depending on model)
■ Plastic (4) or metal (5) tube.
- Fit together the two tubes by twisting
slightly.
’ Telescopic tube (6)
- Push spring latch (7) forward.
- Pull out tube to required length.
- Release spring latch to lock.
Using the cleaning head and Accessory
Nozzles
(depending on model) Fit the large
cleaning head onto the end of the tube.
* The 2 position head (10) Is equipped with
a pedal (ll)which allows you to alter Its
position according to the type of floor to be
cleaned. Hard floor position (tiles, parquet
floors...). Press on the pedal to lower the
brush.Carpet or rug position. Press on the
pedal to lift the brush up.
*
If your appliance is equipped with an
automatic
cleaning
head
(12)
without
pedal, it automatically adapts to the type
of floor to be cleaned.
The
accessories
compartment
contains
accessory (13).
* Crevice Tool (14)
For vacuuming in those normally inaccess
ible places I.e. reaching cobwebs, or down
the side of a sofa!
■ Upholstery Nozzle (15)
For vacuuming uphostery, mattresses, etc.
The thread collectors help to pick up the
threads and fluff.(option)
* Dusting brush (16)
For
vacuuming
picture
frames
furniture
outlines, books and other uneven objects,
(option)
How to plug in and use
Pull out the mains lead to the desired length
and plug into the socket.
Press button (17) to start the vacuum cieaner.
To stop it press the button (17) again.
Adjusting the power ievei
(depending on model)
• Suction capacity increases steplessly up to
MAX.(19)
’ The flexible hose handle (20) has a manual
air flow regulator (21) which allows you to
briefly reduce the suction level.
Carrying and storage
When you have switched off and unplugged
the appliance, press on the button (18) to
automatically rewind the cord.
■ Use stowage clip as shown when storing
the cleaner (22).
Changing the dust bag
The dustbag needs changing when the cleaner
is set to maximum power and the cleaner head
Is off the floor but the “bag full” Indicator window
(23) Is completely coloured red.
Even If the dustbag does not appear to be
full at this stage. It should be changed.
It could be that a great deal of very fine dust
has clogged up the pores of the dust bag.
• Turn off the appliance and unplug it.
• Remove hose.
• Open the cover (24).
Your appliance is equipped with either a paper
dust bag or a fabric dust bag (25)
(depending on model)
• Push the lever forwards in the direction of
the arrow (26), and pull off the full paper
filter bag towards the rear.
Remove the bag and throw it away.
• Insert the new paper filter bag into the unit
with the arrow pointing downwards (27).
-
20
-