SoundMax SM-2404 - Инструкция (Страница 6)

6
Compact disc operations
• Set Function switch to CD/MP3 position.
• Open the CD door by pulling up CD door.
• Put a CD into the CD compartment with label side up and close the CD door by pulling it down gently.
Play/pause mode
• Press the PLAY/PAUSE button to start play.
• Press the Play/Pause button to pause at any track when playing.
• To stop the CD, press the STOP button.
• To remove the CD from the unit open the CD door by pulling up CD door.
• Always press STOP button before opening the CD compartment.
Skip and search mode
• Press NEXT button once to skip to the next track. Press and hold this button to search for a particular
point at high-speed forward. Release the button to resume normal play.
• Press BACK button once to skip back to the beginning of the current track, twice to skip back to the
beginning of the previous track. Press and hold this button to search for a particular point at high
speed backward. Release the button to resume normal play.
• Press SKIP +10/FOLDER to play every 10th track on disc.
Playback modes
• Press REPEAT button repeatedly to switch between different playback modes.
• During playing the mode will change as below:
-
For CD playback: REPEAT => REPEAT ALL => RANDOM => NORMAL.
-
For MP3 playback: REPEAT => REPEAT ALL => RANDOM => NORMAL.
Program mode
• Up to 21 CD and 99 MP3 tracks can be programmed for disc play in any order.
• Before use, be sure to stop the CD by pressing the CD STOP button.
• Press the REPEAT/PROGRAM button. The set is now in memory programming mode, at the first
memory position.
• Select a desired track by using NEXT and BACK buttons.
• Press REPEAT/PROGRAM button again to confirm.
• The set will advance to next memory position.
• Repeat steps described above to enter additional memories into the program if necessary.