Инструкция по эксплуатации SoundMax SM-2404
Страница 5
5
• Insert a blank cassette with the tape-side up, into the proper Guide-rails on the inside of the cassette
door.
• Gently push the cassette door forward (inwards) to close it.
• Make sure the tape is fully and properly inserted before doing so.
• The set is now ready to start recording, which can be done from either the radio or CD-player.
Recording from radio
• Set the FUNCTION switch to RADIO position.
• Tune to the needed station.
• Press the PLAY button and RECORD button on deck simultaneously to start recording.
• Press STOP/ EJECT button to end recording.
Recording from CD
• Set FUNCTION switch to CD position.
• Press RECORD and PLAY buttons on cassette deck simultaneously to start recording.
• Press the PAUSE button on deck.
• Turn on the CD-player and select the exact song to be recorded.
• Release the PAUSE button on deck to start recording.
• Press STOP/EJECT button to end recording.
Erase protection
• To prevent accidental erasing of a cassette, simply break off the two plastic tabs located on the
cassette tape’s rear side.
• When a cassette with removed plastic tabs is inserted, the recording button cannot
be pressed.
• If a cassette is to be erased and re-recorded at a later stage, simply cover the holes
on the cassette where the tabs were removed, with a piece of strong adhesive tape.