Hyundai H-1416 - Инструкция (Страница 6)

6
Cassette tape playback
• Slide the FUNCTION switch to TAPE position.
• Press the STOP/EJECT button to open the cassette compartment.
• Insert a cassette with the tape-side up into the proper Guide-rails on the inside of the cassette door.
• Gently push the cassette door forward (inwards) to close it.
• Press the PLAY button to start the playing.
• Adjust the level of sound with VOLUME knob.
Cassette controls
• Press the PAUSE button to pause the playing.
• Press the STOP/EJECT button to stop the playing, press the button again to open the cassette door and you can take out the tape.
• When the tape plays to the end, playing will be stopped automatically and releases the PLAY button at the same time.
• Press the "STOP" button followed by the "REWIND" or "FAST-FORWARD" button to rewind or forward the tape at high speed.
Cassette tape recording
• Open the cassette door by pressing the "STOP/EJECT" cassette button.
• Insert a blank cassette with the tape-side up, into the proper Guide-rails on the inside of the cassette door.
• Gently push the cassette door forward (inwards) to close it.
• Make sure the tape is fully and properly inserted before doing so.
• The set is now ready to start recording, which can be done from either the radio or CD-player.
Recording from radio
• Set the FUNCTION switch to RADIO position.
• Tune to the desired station.
• Press the PLAY button and RECORD button on deck simultaneously to start recording.
• Press STOP/ EJECT button to end recording
Recording from CD
• Set FUNCTION switch to CD (MP3) position.
• Press RECORD and PLAY buttons on cassette deck simultaneously to start recording.
• Press the PAUSE button on deck.
• Start the CD-player and select the exact song to be recorded.
• Release the PAUSE button on deck to start recording.
• Press STOP/ EJECT button to end recording.