Hyundai H-1416 - Инструкция (Страница 5)

5
Radio operation
• Set FUNCTION switch to RADIO position.
• Select your desired broadcasting band by pressing CD PLAY/ PAUSE/ BAND (AM/FM) button. AM of FM will be displayed.
• Press NEXT/TUNE-UP button or BACK/TUNE-DOWN button and then release the button when the fast scanning starts. The frequency will continue to
change and will automatically stop when a broadcast station is received.
• To receive a weak broadcast signal press the NEXT/TUNE-UP or BACK/TUNE-DOWN button by one press at a time and adjust the frequency you wish
to receive.
Saving Stations to Memory
• 50 broadcast stations: 30 FM band and 20 AM stations can be stored to the preset memory.
• During tuner mode, find a desired station.
• Press CD FOLDER/ MEM.SET/ SKIP +10 button to activate memory setting mode. The "MEM" symbol will appear on the display.
• Press NEXT/TUNE-UP button or BACK/TUNE-DOWN button to choose the desired memory location. The location number is flashing on the left side
of the screen.
• Press CD FOLDER/ MEM.SET/ SKIP +10 button again to store the desired station.
• Repeat steps for storing stations to other locations.
• To clear the memory of any location simply save a new station to the same memory.
Selecting stored stations
• Press CD MEMORY/REPEAT/PROG BUTTON once. "MEM" symbol will appear on the display.
• Press NEXT/TUNE-UP or BACK/TUNE-DOWN button to choose the memory location. The stored station will be selected.
Antenna
• For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
• The AM signals are picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.
FM and FM stereo reception
• In particular when stereo signal is weak and much noise are received, it is preferable to receive the programmer in mono. Press STOP/ CD/USB/SD/ FM
mode button to switch between FM stereo and mono modes.
• If the program is received in FM stereo, "ST" indicator will light up.