Pioneer DEH-3910MP - Инструкция (Страница 10)

! If specific information has not been recorded
on a disc, NO XXXX will be displayed (e.g.,
NO T-TTL).
! When playing back VBR-recorded WMA files,
the average bit rate value is displayed.
! When playing back VBR (variable bit rate)-re-
corded MP3 files, VBR is displayed instead of
bit rate value.
! Depending on the version of iTunes ®
used to
write MP3 files onto a disc, comment informa-
tion may not be correctly displayed.
— iTunes is a trademark of Apple Computer,
Inc., registered in the U.S. and other coun-
tries.
! The sampling frequency shown in the display
may be abbreviated.
Audio Adjustments
Introduction of audio adjustments
% Press AUDIO to display the audio func-
tion names.
Press
AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)
—EQ (equalizer)—
LOUD (loudness)
—FIE (front image enhancer)
—SLA (source level adjustment)
# When selecting the FM tuner as the source,
you cannot switch to
SLA.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
# To return to the display of each source, press
BAND.
Using balance adjustment
Fader/balance setting creates an ideal listen-
ing environment in all occupied seats.
1 Press AUDIO to select FAD.
# If the balance setting has been previously ad-
justed,
BAL will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
FAD F15 to FAD R15 is displayed.
# FAD 0 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
BAL L 9 to BAL R 9 is displayed.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
SPR-BASS Super bass
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
CUSTOM Custom
FLAT Flat
! CUSTOM is an adjusted equalizer curve
that you create.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
Operating this unit
En
10
Section
02